Paracetamol (acetaminophen) (CAS 103-90-2)

Acetaminophen

CAS 103-90-2  ·  C8H9NO2  ·  MW 151.16 g/mol

Paracetamol (acetaminophen) (CAS 103-90-2) — full MolGod record →
Safety data sheet with all sections: GHS classification, transport, regulatory status, spectra, 3D model and literature.

Full record: Paracetamol (acetaminophen) (CAS 103-90-2) — Safety Data Sheet →

正在加载分子...
3D模型Acetaminophen,CAS 103-90-2,分子式C8H9NO2, 摩尔质量 151.16 g/mol

模型视图

  • Acetaminophen (CAS 103-90-2) – 3D球棍模型, MolGod Viewer
    3D球棍模型
  • Acetaminophen (CAS 103-90-2) – 3D骨架模型, MolGod Viewer
    3D骨架模型
  • 3D空间填充模型 – 旋转动画
  • Acetaminophen (CAS 103-90-2) – 二维结构, MolGod Viewer
    二维结构

© 2026 MolGod.org。保留所有权利。 · 图片版权

🖨️ 3D 打印模型与许可MolGod_Print3D_1

该分子带底座的可直接打印模型:旋转、放大,查看刚打印完成和去除支撑后的样子。

Preview of the 6-colour print model — rotate it with your mouse or finger; see it as printed, finished, as the molecule alone, and where to cut it off the pencils

Loading the 3D model…

Drag to rotate; scroll or pinch to zoom. Each part is shown in the colour of its filament.

6 colours in one print, no paintingBambu Lab H2C, 0.4 mm nozzle, 0.16 mm layersabout 166 g of PLAabout 16 h 19 min of printing (slicer estimate)Slicer-tested, multicolour test print still to come

⬇️ Print file for H2C (3MF) · 35 MBFull multicolour specification ↓

Acetaminophen (CAS 103-90-2), C8H9NO2 - 3D ball-and-stick molecular model, engraved element symbols (C H N O), MolGod STL preview下载图片

MG_106-378-790-33 · engraved · 341,782 △ · 16 MB · SHA-256 dd16a6f53ccb6b78

下载 3D 模型: Acetaminophen, C8H9NO2, CAS 103-90-2 · ENGRAVED (C, H, N, O) · 16 MB

Acetaminophen (CAS 103-90-2) - 3D model ready to print on a display base, MolGod STL preview下载图片

MG_106-378-790-33 · ready to print · ANT HOUSE v7 · 390,946 △ · 19 MB · SHA-256 4f3bff329c067442

Digital geometry validated. Slicer-tested with the stated profile. Physical print not yet tested.

打印尺寸单位为毫米:按 100 % 导入,请勿缩放。

3D 打印设置 · ANT HOUSE v7 — 数字几何已验证;已使用下方配置(PrusaSlicer 2.8.1 · ANT HOUSE profile v4 (in the 3MF))对此文件进行切片检查;尚未进行实物打印。
文件molgod-103-90-2-ready-to-print.stl · ANT HOUSE v7
SHA-256 4f3bff329c06744285c751551a3e7defc7c81c01b806ce2bf13bc26718b005f0
已于 2026-10-29 (UTC) 针对此 SHA-256 完成切片
就绪等级第 3 级(共 5 级)— 切片已验证 (1 已生成 · 2 几何已验证 · 3 切片已验证 · 4 已实物打印 · 5 打印合格)。 专为 FDM 打印设计。几何已验证,已使用指定配置检查切片。尚未进行实物打印。
方法FDM, PLA 1.75 mm
喷嘴0.4 mm(最小细节按此喷嘴设计;请勿使用更大的喷嘴)
层高0.2 mm
填充15%,外壳 3 圈
支撑是。13 根铅笔式支撑(Ø 3.5 / 5 mm,六边形,“笔芯”颈部 Ø 1.8 mm,原子下方带 45° 托杯,长 10.0–52.5 mm)是模型的一部分——请勿移除。另请启用切片软件的自动支撑:它们是临时的(在我们的测试中约占打印体积的 16.5 %)——在最小的球体(如氢原子)和细键附近请小心移除。 在您自己的切片软件中:使用有机(树状)支撑,并关闭“仅从打印板生成”(on build plate only)——每棵支撑树都从底座开始(Cura:Support Placement = Everywhere)。选择打印机后按 A(排列),让模型位于打印板中央。
温度3MF 配置:首层喷嘴 215 °C,之后 210 °C;热床 60 °C(起始值——请遵循耗材厂商的范围);零件风扇从第 4 层开启。现成 G-code 使用打印机厂商配置中的温度和风扇设置(见软件包中的 gcode/README_GCODE.txt)。 现成 G-code(Prusa MK4、Prusa MINI、Creality Ender-3 S1):首层喷嘴 210 °C,之后 205 °C;热床 60 °C——数值取自各文件头。
摆放方向按原样打印:底座平放在打印平台上(二维码面朝下);请勿旋转
比例按 100 % 导入——文件单位为毫米;请勿缩放 (分子比例 1 Å = 10.14 mm)
整体尺寸100.0 × 100.0 × 90.4 mm (X × Y × Z);底座 Ø 100 × 20 mm
已验证2026-10-31 (UTC):此文件的几何检查
最小打印平台125 × 125 mm;高度 96 mm
预计打印时间约 9 h 45 min(PrusaSlicer 中的 3MF 配置;现成 G-code 的时间见上方)
耗材 (PLA)约 83–84 g(切片软件估算)

此模型的打印方式

Acetaminophen(CAS 103-90-2)刚打印完成:橙色切片支撑,黄色铅笔支柱
刚打印完成:去除橙色的切片支撑,保留黄色铅笔支柱
Acetaminophen(CAS 103-90-2)去除切片支撑后的成品模型
成品模型:白色分子立于黄色铅笔支柱上,带凸起的 MolGod 标志

渲染图 (PNG):

Acetaminophen(CAS 103-90-2)可直接打印的 3D 模型,正视图,由 MolGod STL 文件渲染
正视图
Acetaminophen(CAS 103-90-2)可直接打印的 3D 模型,侧视图,由 MolGod STL 文件渲染
侧视图
Acetaminophen(CAS 103-90-2)可直接打印的 3D 模型,四分之三视图,由 MolGod STL 文件渲染
四分之三视图
Acetaminophen(CAS 103-90-2)可直接打印的 3D 模型,俯视图,由 MolGod STL 文件渲染
俯视图
Acetaminophen(CAS 103-90-2)可直接打印的 3D 模型,底视图,由 MolGod STL 文件渲染
底视图

供打印服务商使用:
技术数据表(PDF:图纸、尺寸、打印规格) · 584 KB · SHA-256 0280e3acbd205ba8…
打印资料包(ZIP:STL、含设置的 3MF、G-code、分步说明、附来源的设计说明、“需去除部分”示意图、预览图、切片配置、检查报告、质检清单、反馈表、许可证) · 45 MB · SHA-256 f757396eabf98afa…

下载 3D 模型: Acetaminophen, C8H9NO2, CAS 103-90-2 · READY TO PRINT · 19 MB · base Ø 100 mm · single integrated solid

Paracetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, front three-quarter view
Paracetamol (acetaminophen, CAS 103-90-2) READY TO PRINT MULTICOLOR release r2 as printed: render with the slicer supports (orange) taken from the sliced G-code, all standing on the baseParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, top viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, side viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, low front viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, back viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the scissor cup under an oxygen atomParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the raised ACETAMINOPHEN / CAS 103-90-2 labelParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the raised formula C8H9NO2Paracetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, bottom viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, 30 render views from every side, top and bottom

Pictures above are renders of the print model, not photos (the second one shows it as printed, with its supports). The multicolour version has not been printed yet.

  • For Bambu Lab H2C
  • 6 colours, one print
  • 0.4 mm nozzle · 0.16 mm layers
  • 1010 filament changes
  • about 16 h 19 min
  • about 166 g of PLA

Made for one printer

This release is one print file for the Bambu Lab H2C. We have not prepared or tested it for other printers.

What you get

Paracetamol as a ball-and-stick model in six colours, printed in one go and standing on the same pencil pillars as the single-colour READY TO PRINT version: CPK atoms with element letters, red pencils with gold sharpened wood, and a white base, 100 mm across, with the blue MolGod.org logo, the raised formula C8H9NO2 and a raised ACETAMINOPHEN / CAS 103-90-2 label.

Atom colours follow the chemistry convention

Each atom shows its element symbol and the CPK colour used for molecular models in chemistry: carbon black, hydrogen white, nitrogen blue, oxygen red. CPK stands for the Corey–Pauling–Koltun space-filling models cited below. Single bonds are white. The one double bond to a heteroatom in paracetamol, the C=O of the amide group, is printed red so it stands out; the C=C double bonds of the benzene ring stay white.

Where the name CPK comes from

Where the geometry comes from

Atom positions come from the 3D conformer of paracetamol computed by PubChem (CID 1983) with the OMEGA conformer generator. It is a computed structure, not an experimental crystal structure. The MolGod engine (R3, recipe r3-1.3) scales it, orients it for printing and sets it on the base with its own pencil supports.

Sources for the 3D structure

  • Bolton, Evan E., Jie Chen, Sunghwan Kim, Lianyi Han, Siqian He, Wenyao Shi, Vahan Simonyan, Yan Sun, et al. 2011. "PubChem3D: A New Resource for Scientists." Journal of Cheminformatics 3: 32. https://doi.org/10.1186/1758-2946-3-32
  • Hawkins, Paul C. D., A. Geoffrey Skillman, Gregory L. Warren, Benjamin A. Ellingson, and Matthew T. Stahl. 2010. "Conformer Generation with OMEGA: Algorithm and Validation Using High Quality Structures from the Protein Databank and Cambridge Structural Database." Journal of Chemical Information and Modeling 50 (4): 572–584. https://doi.org/10.1021/ci100031x

Which file do I need?

There is one: the sliced 3MF for the H2C. It holds the model split into six colours, our printer, filament and support settings, and the G-code. Print it as it is, or open it in Bambu Studio, change what you like and slice again.

Print settings

Nozzle 0.4 mm on every nozzle, layer 0.16 mm, Bambu PLA Basic in six colours. Supports: regular, snug style, threshold 40°, with "remove small overhangs" switched off; a support blocker ring at the bottom edge of the base is part of the file. Of the five support settings we sliced, 40° needed the least support material while keeping every support off the build plate. All supports stand on the base or on the model. The G-code contains 1010 filament changes; Bambu Studio estimates 16 h 19 min and 166 g. Your printer and settings may differ.

Cutting the molecule off the pencils

The pencils hold the molecule during printing and can stay as a display stand. If you want the molecule on its own, each pencil ends in a small cone under the atom, the scissor cup, printed in the colour of that atom:

  1. Remove the slicer supports first (snug supports, not trees). The red pencils are part of the model and stay.
  2. Cut with flush cutters straight across the black graphite where it meets the cup. The cross-section there is about 2 mm.
  3. Cut one pencil at a time and do not twist or pull the molecule: the bonds are thin.
  4. The cut face stays in the colour of the atom. Smooth a small stub with fine sandpaper if you like.
Paracetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the scissor cup under an oxygen atom
Render: the scissor cup under an oxygen atom of paracetamol, in the atom's colour, at the tip of the pencil graphite. Not yet tried on a physical multicolour print.

Using it in class

The model can help pupils recognise atoms by colour and symbol, find the benzene ring with its hydroxyl group on one side and the amide group on the opposite side, spot the single C=O double bond in red, and compare the flat formula on the base with the 3D shape. We have not run classroom studies yet; teachers who try it are welcome to write to pure@molgod.org.

Filaments: six colours, one per nozzle (the 7th nozzle stays free)

  • Jade White 10100 · 92.7 gbase, hydrogen atoms, single bonds and the C=C bonds of the ring, letters on C, N and O
  • Black 10101 · 18.3 gcarbon atoms, pencil graphite, letters on H
  • Blue 10601 · 9.1 gthe nitrogen atom, MolGod.org logo, ACETAMINOPHEN label, CAS number, formula
  • Red 10200 · 24.0 goxygen atoms, the C=O bond, pencil bodies
  • Light Gray 10104 · 4.9 gmetal ferrules on the long pencils
  • Gold · 17.2 gsharpened wood and erasers

Downloads

Current multicolour release: r2 (5 November 2026), checked digitally and in the slicer; a physical multicolour test print is still pending. The pictures on this tab are renders.

Quality passport · release r2 · 5 November 2026

What we checked for this multicolour release, what the result was and what it is based on. A higher step is never assumed from a lower one.

  • PASSChemical identityCAS 103-90-2, C8H9NO2, InChIKey RZVAJINKPMORJF-UHFFFAOYSA-N, PubChem CID 1983. The model has 20 atoms, matching the formula (8 C, 9 H, 1 N, 2 O), each with its element letter.
  • PASSGeometry and meshOne watertight solid, 382,722 triangles, 139,123 mm³; inside it the colour parts match its volume to within 0.000005 %. 24 bond cylinders (the C=O bond and the three C=C bonds of the ring are drawn double), 13 pencils.
  • PASSMulticolour checksColour split complete: 20 atoms with letters, 24 bond cylinders, no part without a colour, no fragments. Built with the same design rules as our reference multicolour model, checked automatically before the build.
  • PASSSlicer check (Bambu Studio 02.08.02.61, H2C)Sliced without errors; 0 unsupported spots on the model; no supports on the build plate. Five support settings were sliced and compared; at 46° and with tree supports some supports reached the build plate, so 40° was chosen.
  • PASSPreview checks (molecule only, where to cut)13 cuts for 13 pencils, sharpened wood under every cut and under no other flat underside, the molecule comes off as one piece, nothing left above any cut.
  • PENDINGPhysical multicolour printNot printed yet.

Level 3 of 5 — Slicer Verified (1 Generated · 2 Geometry Validated · 3 Slicer Verified · 4 Physically Printed · 5 Print Qualified). Designed for FDM printing. Geometry validated and slicing checked using the specified profile. No physical print has been made yet.

Release r2: digital geometry checked; sliced and checked in Bambu Studio 02.08.02.61 on the Bambu Lab H2C profile. Physical multicolour print: pending.

Licence of this print model: CC BY-NC-SA 4.0 International (non-commercial) - https://creativecommons.org/licenses/by-nc-sa/4.0/

Acetaminophen (CAS 103-90-2), C8H9NO2 - 3D ball-and-stick molecular model, MolGod STL preview下载图片

MG_106-378-790-33 · normal · 8,704 △ · 425 KB · SHA-256 e8d15833d65fe88b

下载 3D 模型: Acetaminophen, C8H9NO2, CAS 103-90-2 · NORMAL · 425 KB

许可与来源 ↓

⚠️ MolGod.org 的标志和名称(包括底座上的凸起标志)是我们的商标。知识共享许可不涵盖商标(§ 2(b)(2))。未经我们书面许可,不得使用 MolGod.org 标志标识您自己的产品、用于广告,或以暗示我们认可的方式使用。

关于 Paracetamol (acetaminophen) (CAS 103-90-2)

Paracetamol (acetaminophen) (CAS 103-90-2) 是一种化学品,登记号为 CAS 103-90-2,分子式为 C8H9NO2,摩尔质量为 151.16 g/mol。

该分子包含 20 个原子,通过 20 个化学键连接。 该化合物的完整系统 IUPAC 名称为 N-(4-hydroxyphenyl)acetamide。 上方的交互式 3D 模型可查看原子的空间排列——您可以用鼠标旋转、用滚轮缩放,并在骨架 / 球棍 (Ball & Stick) / 空间填充 (Space Fill) 显示模式之间切换。

在理化性质方面, 分配系数 logP = 0.5 (正值,亲脂性化合物),极性表面积 PSA = 49.3 Ų,2 个氢键供体和 2 个氢键受体。 这些参数对于评估生物利用度以及与生物分子的相互作用至关重要。

该化合物的化学数据来自 PubChem(NIH NLM NCBI),全球最大的化学数据库之一。所有信息均自动更新,并附有符合 CLP 法规(EC 1272/2008)的 GHS 危险说明翻译。交互式3D模型和查看器图像受版权保护(© MolGod.org)——使用条款:molgod.org/copyright/。

理化性质
Molecular formulaC8H9NO2
Molar mass151.16 g/mol
IUPACN-(4-hydroxyphenyl)acetamide
SMILESCC(=O)NC1=CC=C(C=C1)O
InChIKeyRZVAJINKPMORJF-UHFFFAOYSA-N
logP (XLogP3)0.5
PSA49.3 Ų
HBD / HBA2 / 2
PubChem CIDCID 1983 ↗
GHS 安全

信号词: 警告

GHS07
GHS07
GHS09
GHS09

H302 — 吞咽有害

H315 — 造成皮肤刺激

H319 — 造成严重眼刺激

H412 — 对水生生物有害并具有长期持续影响

科学文献

Related literature

6 articles · 5 open access · Sources: PubMed, OpenAlex, Semantic Scholar

筛选:导出:📄 BibTeX📑 RIS📋 EndNote🔧 CSL-JSON

📈 发表时间线(文章数:6)

2025:文章数 120252026:文章数 52026

柱高 = 当年的文章数量。将鼠标悬停在柱上可查看详情。

Data from PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary generated by Semantic Scholar TLDR. Articles marked with require paid access.

同义词
acetaminophen · Paracetamol · 4-Acetamidophenol · 103-90-2 · N-(4-Hydroxyphenyl)acetamide · Tylenol · APAP · 4'-Hydroxyacetanilide · Datril · Panadol · N-Acetyl-p-aminophenol · Acetaminofen · Algotropyl · p-Acetamidophenol · p-Hydroxyacetanilide
数据来源
相关分子
📜 许可与来源MolGod_License_1
模型
Acetaminophen · 103-90-2
InChIKey
RZVAJINKPMORJF-UHFFFAOYSA-N
许可协议
CC BY-SA 4.0 International
打印模型许可(READY TO PRINT)
CC BY-NC-SA 4.0 International — 含底座和铅笔支柱的模型;上方许可适用于分子文件 NORMAL 和 ENGRAVED
署名
MolGod Scientific — Acetaminophen (CAS 103-90-2)
许可与来源记录
Acetaminophen (CAS 103-90-2) →
MolGod 分子记录
Acetaminophen →
源数据
PubChem CID 1983 ↗
模型信息
由 MolGod 生成的 STL · MolGod STL Exporter build 48804cd20b0d · 生成于 2026-10-14
SHA-256 (STL)
e8d15833d65fe88b00a99c0937d8a8c066c9b48fc0b20f5ea6390fb655955042
MD5 (STL)
d6120b63c977e9052eaf3694c1f28a84
MolGod Identification Number
MG_106-378-790-33
转换
MolGod Scientific 球棍模型网格
更改
转换为三角化分子网格;原子坐标与连接关系未改变。
Wikimedia Commons
STL · PNG
可免费打印的分子模型
下载模型,打印出来并用于教学。发布照片、教学材料或改编作品时,CC BY-SA 4.0 International 许可要求:注明“MolGod Scientific”为模型作者,附上原始资源和许可文本的链接,标明所作修改,并以相同许可分享改编作品。本节提供可直接使用的署名文本。无需注册、无需付费,也无需留下评价。
本说明适用于分子文件 NORMAL 和 ENGRAVED。含底座的 READY TO PRINT 模型采用 CC BY-NC-SA 4.0 许可(非商业用途)——详见 READY TO PRINT 选项卡。 ↑

⚠️ MolGod.org 的标志和名称(包括底座上的凸起标志)是我们的商标。知识共享许可不涵盖商标(§ 2(b)(2))。未经我们书面许可,不得使用 MolGod.org 标志标识您自己的产品、用于广告,或以暗示我们认可的方式使用。

本许可适用于 MolGod 创建的 STL 网格,不自动适用于第三方源材料。

This 3D model is also published on: NIH 3D (3DPX-023797) · Wikimedia Commons
Included in datasets: OSF project index
Source structure: PubChem (CID 1983)
—