Paracetamol (acetaminophen) (CAS 103-90-2)
Acetaminophen
CAS 103-90-2 · C8H9NO2 · MW 151.16 g/mol
Safety data sheet with all sections: GHS classification, transport, regulatory status, spectra, 3D model and literature.
Full record: Paracetamol (acetaminophen) (CAS 103-90-2) — Safety Data Sheet →
Modelweergaven
© 2026 MolGod.org. Alle rechten voorbehouden. · Beeldrechten
🖨️ 3D-printmodel en licentieMolGod_Print3D_1
Een printklaar model van dit molecuul op een sokkel: draai het, zoom in en bekijk hoe het er direct uit de printer en na het verwijderen van de supports uitziet.
Preview of the 6-colour print model — rotate it with your mouse or finger; see it as printed, finished, as the molecule alone, and where to cut it off the pencils
Loading the 3D model…Drag to rotate; scroll or pinch to zoom. Each part is shown in the colour of its filament.
⬇️ Print file for H2C (3MF) · 35 MBFull multicolour specification ↓
Voorbeeld van het 3D-printmodel — draai het met je muis of vinger; wissel: met supports / zonder supports
Sleep om te draaien; scrollwiel of twee vingers om te zoomen.
Print het zelf — gratis
- Licentie CC BY-NC-SA 4.0: je mag het printmodel (met voet) niet-commercieel printen, delen en bewerken — thuis, op school, aan de universiteit, in een makerspace — met naamsvermelding. CC BY-NC-SA 4.0
- Commercieel gebruik — verkoop van prints en betaalde printdiensten — alleen met onze licentie: pure@molgod.org.
- De molecule alleen (bestanden NORMAL en ENGRAVED) blijft onder CC BY-SA 4.0.
1. Download een bestand
Twijfel je wat je moet kiezen? Prusa MK4, MINI of Ender-3 S1 — neem de G-code daarvan. Een andere printer — het 3MF-project (PrusaSlicer) of de STL (andere slicers). Print je in een makerspace of printservice — geef het ZIP-pakket en het PDF-gegevensblad door.
Kant-en-klare G-code voor je printer — elk bestand alleen voor de printer in de naam. Laden en printen:
Andere printer? Download het 3MF-project met alle instellingen en open het in PrusaSlicer — of importeer het model in je eigen slicer.
2. Print zoals geleverd
Sokkel plat op het bed, niet draaien en niet schalen — het bestand is in millimeters. Laat de automatische supports van je slicer aan.
In je eigen slicer: organische (boom)supports met „alleen op het printbed” (on build plate only) UIT — elke boom begint op de voet (Cura: Support Placement = Everywhere). Druk na het kiezen van je printer op A (Rangschikken) zodat het model in het midden van het bed staat.
3. Werk het model af
Verwijder alleen de oranje slicer-supports. Laat alle 13 gele potloden zitten — ze horen bij het model en dragen de molecule. Knip de supports af met een zijkniptang, van boven naar beneden; niet trekken en niet draaien. Het model print in één kleur — de kleuren zie je alleen in de preview en op de afbeelding hieronder.
Paneel 3 is een render, geen foto van een print — het model wordt in één kleur geprint.
Optioneel: wil je de molecule in je hand draaien? Knip als laatste stap elk geel potlood door bij de dunne hals vlak onder de bol (ongeveer 2 mm) en schuur het kleine kegeltje op de bol glad. Werk langzaam — de bindingen zijn ongeveer 2 mm dik. Deze stap hebben we nog niet met een eigen print bevestigd.
4. Laat ons je print zien
Stuur ons foto’s van je print — met de supports en nadat je ze hebt verwijderd — naar pure@molgod.org.
Deze 4 foto’s helpen ons het meest: het hele model met supports, het afgewerkte model na het verwijderen, een close-up van de dunste bindingen en een close-up van de letters op de bollen. Feedback is welkom, maar geen voorwaarde om het model te downloaden of te gebruiken.
3D-printen draait om details. Is iets niet gelukt, stuur ons dan foto’s: we helpen je en verbeteren het model op basis van je opmerkingen. Docent? Doe mee aan golf 1 van de pilot →
Geen 3D-printer?
Vraag het aan het makerspace van je school, een bibliotheek met een 3D-printer of een 3D-printservice in de buurt. Geef ze het printpakket of het technische gegevensblad (PDF) — daar staat alles in wat ze nodig hebben.
Een betaalde 3D-printdienst is commercieel gebruik en heeft onze commerciële licentie nodig: pure@molgod.org. Een schoolwerkplaats, bibliotheek of universiteit die gratis print, heeft die niet nodig.
Status: digitaal en in de slicer gecontroleerd; we hebben het nog niet fysiek geprint. Jouw print kan de eerste zijn. Printinstellingen, bestanden en licentie ↓
Afbeelding downloadenMG_106-378-790-33 · engraved · 341,782 △ · 16 MB · SHA-256 dd16a6f53ccb6b78
3D-model downloaden: Acetaminophen, C8H9NO2, CAS 103-90-2 · ENGRAVED (C, H, N, O) · 16 MB
MG_106-378-790-33 · ready to print · ANT HOUSE v7 · 390,946 △ · 19 MB · SHA-256 4f3bff329c067442
Digital geometry validated. Slicer-tested with the stated profile. Physical print not yet tested.
Printformaat in millimeters: importeer op 100 %, niet schalen.
| Bestand | molgod-103-90-2-ready-to-print.stl · ANT HOUSE v7 SHA-256 4f3bff329c06744285c751551a3e7defc7c81c01b806ce2bf13bc26718b005f0Gesliced op 2026-10-29 (UTC) voor deze SHA-256 |
|---|---|
| Gereedheidsniveau | Niveau 3 van 5 — Slicer-geverifieerd (1 Gegenereerd · 2 Geometrie gevalideerd · 3 Slicer-geverifieerd · 4 Fysiek geprint · 5 Printgekwalificeerd). Ontworpen voor FDM-printen. Geometrie gevalideerd, slicen gecontroleerd met het opgegeven profiel. Er is nog geen fysieke print gemaakt. |
| Methode | FDM, PLA 1.75 mm |
| Nozzle | 0.4 mm (de kleinste details zijn ontworpen voor deze nozzle; gebruik geen grotere) |
| Laaghoogte | 0.2 mm |
| Vulling | 15%, 3 perimeters |
| Supports | Ja. 13 potloodsupports (Ø 3.5 / 5 mm, zeshoekig, grafiethals Ø 1.8 mm met kelk van 45° onder het atoom, 10.0–52.5 mm lang) maken deel uit van het model — verwijder ze niet. Schakel ook de automatische supports van de slicer in: die zijn tijdelijk (ca. 16.5 % van het printvolume in onze run) — verwijder ze voorzichtig bij de kleinste bollen (bijv. waterstof) en dunne bindingen. In je eigen slicer: organische (boom)supports met „alleen op het printbed” (on build plate only) UIT — elke boom begint op de voet (Cura: Support Placement = Everywhere). Druk na het kiezen van je printer op A (Rangschikken) zodat het model in het midden van het bed staat. |
| Temperatuur | 3MF-profiel: 215 °C nozzle op de eerste laag, daarna 210 °C; bed 60 °C (startpunt — volg het bereik van de filamentfabrikant); onderdeelventilator vanaf laag 4. De kant-en-klare G-code gebruikt de temperaturen en ventilatorinstellingen van de printerfabrikanten (lijst: gcode/README_GCODE.txt in het pakket). Kant-en-klare G-code (Prusa MK4, Prusa MINI, Creality Ender-3 S1): spuitmond 210 °C op de 1e laag, daarna 205 °C; bed 60 °C — waarden uit de kop van elk bestand. |
| Oriëntatie | Print zoals geleverd: voet plat op het printbed (kant met de QR-code naar beneden); niet draaien |
| Schaal | Importeer op 100 % — het bestand is in millimeters; niet schalen (molecuulschaal 1 Å = 10.14 mm) |
| Totale afmetingen | 100.0 × 100.0 × 90.4 mm (X × Y × Z); voet Ø 100 × 20 mm |
| Gevalideerd | 2026-10-31 (UTC): geometriecontroles van dit bestand |
| Minimaal printbed | 125 × 125 mm; hoogte 96 mm |
| Geschatte printtijd | ongeveer 9 h 45 min (3MF-profiel in PrusaSlicer; tijden van de kant-en-klare G-code hierboven) |
| Filament (PLA) | ca. 83–84 g (schatting van de slicer) |
Zo wordt dit model geprint
Renders (PNG):
Voor printservices:
Technisch datablad (PDF: tekening, afmetingen, printspecificatie) · 584 KB · SHA-256 0280e3acbd205ba8…
Printpakket (ZIP: STL, 3MF met instellingen, G-code, stapsgewijze instructies, ontwerpnotities met bronnen, afbeelding „wat verwijderen”, voorbeelden, slicerprofiel, controlerapport, QC-checklist, feedbackformulier, licentie) · 45 MB · SHA-256 f757396eabf98afa…
3D-model downloaden: Acetaminophen, C8H9NO2, CAS 103-90-2 · READY TO PRINT · 19 MB · base Ø 100 mm · single integrated solid

Pictures above are renders of the print model, not photos (the second one shows it as printed, with its supports). The multicolour version has not been printed yet.
- For Bambu Lab H2C
- 6 colours, one print
- 0.4 mm nozzle · 0.16 mm layers
- 1010 filament changes
- about 16 h 19 min
- about 166 g of PLA
Made for one printer
This release is one print file for the Bambu Lab H2C. We have not prepared or tested it for other printers.
What you get
Paracetamol as a ball-and-stick model in six colours, printed in one go and standing on the same pencil pillars as the single-colour READY TO PRINT version: CPK atoms with element letters, red pencils with gold sharpened wood, and a white base, 100 mm across, with the blue MolGod.org logo, the raised formula C8H9NO2 and a raised ACETAMINOPHEN / CAS 103-90-2 label.
Atom colours follow the chemistry convention
Each atom shows its element symbol and the CPK colour used for molecular models in chemistry: carbon black, hydrogen white, nitrogen blue, oxygen red. CPK stands for the Corey–Pauling–Koltun space-filling models cited below. Single bonds are white. The one double bond to a heteroatom in paracetamol, the C=O of the amide group, is printed red so it stands out; the C=C double bonds of the benzene ring stay white.
Where the name CPK comes from
- Corey, Robert B., and Linus Pauling. 1953. "Molecular Models of Amino Acids, Peptides, and Proteins." Review of Scientific Instruments 24 (8): 621–627. https://doi.org/10.1063/1.1770803
- Koltun, Walter L. 1965. "Precision Space-Filling Atomic Models." Biopolymers 3 (6): 665–679. https://doi.org/10.1002/bip.360030606
Where the geometry comes from
Atom positions come from the 3D conformer of paracetamol computed by PubChem (CID 1983) with the OMEGA conformer generator. It is a computed structure, not an experimental crystal structure. The MolGod engine (R3, recipe r3-1.3) scales it, orients it for printing and sets it on the base with its own pencil supports.
Sources for the 3D structure
- Bolton, Evan E., Jie Chen, Sunghwan Kim, Lianyi Han, Siqian He, Wenyao Shi, Vahan Simonyan, Yan Sun, et al. 2011. "PubChem3D: A New Resource for Scientists." Journal of Cheminformatics 3: 32. https://doi.org/10.1186/1758-2946-3-32
- Hawkins, Paul C. D., A. Geoffrey Skillman, Gregory L. Warren, Benjamin A. Ellingson, and Matthew T. Stahl. 2010. "Conformer Generation with OMEGA: Algorithm and Validation Using High Quality Structures from the Protein Databank and Cambridge Structural Database." Journal of Chemical Information and Modeling 50 (4): 572–584. https://doi.org/10.1021/ci100031x
Which file do I need?
There is one: the sliced 3MF for the H2C. It holds the model split into six colours, our printer, filament and support settings, and the G-code. Print it as it is, or open it in Bambu Studio, change what you like and slice again.
Print settings
Nozzle 0.4 mm on every nozzle, layer 0.16 mm, Bambu PLA Basic in six colours. Supports: regular, snug style, threshold 40°, with "remove small overhangs" switched off; a support blocker ring at the bottom edge of the base is part of the file. Of the five support settings we sliced, 40° needed the least support material while keeping every support off the build plate. All supports stand on the base or on the model. The G-code contains 1010 filament changes; Bambu Studio estimates 16 h 19 min and 166 g. Your printer and settings may differ.
Cutting the molecule off the pencils
The pencils hold the molecule during printing and can stay as a display stand. If you want the molecule on its own, each pencil ends in a small cone under the atom, the scissor cup, printed in the colour of that atom:
- Remove the slicer supports first (snug supports, not trees). The red pencils are part of the model and stay.
- Cut with flush cutters straight across the black graphite where it meets the cup. The cross-section there is about 2 mm.
- Cut one pencil at a time and do not twist or pull the molecule: the bonds are thin.
- The cut face stays in the colour of the atom. Smooth a small stub with fine sandpaper if you like.

Using it in class
The model can help pupils recognise atoms by colour and symbol, find the benzene ring with its hydroxyl group on one side and the amide group on the opposite side, spot the single C=O double bond in red, and compare the flat formula on the base with the 3D shape. We have not run classroom studies yet; teachers who try it are welcome to write to pure@molgod.org.
Filaments: six colours, one per nozzle (the 7th nozzle stays free)
- Jade White 10100 · 92.7 gbase, hydrogen atoms, single bonds and the C=C bonds of the ring, letters on C, N and O
- Black 10101 · 18.3 gcarbon atoms, pencil graphite, letters on H
- Blue 10601 · 9.1 gthe nitrogen atom, MolGod.org logo, ACETAMINOPHEN label, CAS number, formula
- Red 10200 · 24.0 goxygen atoms, the C=O bond, pencil bodies
- Light Gray 10104 · 4.9 gmetal ferrules on the long pencils
- Gold · 17.2 gsharpened wood and erasers
Downloads
Current multicolour release: r2 (5 November 2026), checked digitally and in the slicer; a physical multicolour test print is still pending. The pictures on this tab are renders.
Quality passport · release r2 · 5 November 2026
What we checked for this multicolour release, what the result was and what it is based on. A higher step is never assumed from a lower one.
- PASSChemical identityCAS 103-90-2, C8H9NO2, InChIKey RZVAJINKPMORJF-UHFFFAOYSA-N, PubChem CID 1983. The model has 20 atoms, matching the formula (8 C, 9 H, 1 N, 2 O), each with its element letter.
- PASSGeometry and meshOne watertight solid, 382,722 triangles, 139,123 mm³; inside it the colour parts match its volume to within 0.000005 %. 24 bond cylinders (the C=O bond and the three C=C bonds of the ring are drawn double), 13 pencils.
- PASSMulticolour checksColour split complete: 20 atoms with letters, 24 bond cylinders, no part without a colour, no fragments. Built with the same design rules as our reference multicolour model, checked automatically before the build.
- PASSSlicer check (Bambu Studio 02.08.02.61, H2C)Sliced without errors; 0 unsupported spots on the model; no supports on the build plate. Five support settings were sliced and compared; at 46° and with tree supports some supports reached the build plate, so 40° was chosen.
- PASSPreview checks (molecule only, where to cut)13 cuts for 13 pencils, sharpened wood under every cut and under no other flat underside, the molecule comes off as one piece, nothing left above any cut.
- PENDINGPhysical multicolour printNot printed yet.
Level 3 of 5 — Slicer Verified (1 Generated · 2 Geometry Validated · 3 Slicer Verified · 4 Physically Printed · 5 Print Qualified). Designed for FDM printing. Geometry validated and slicing checked using the specified profile. No physical print has been made yet.
Release r2: digital geometry checked; sliced and checked in Bambu Studio 02.08.02.61 on the Bambu Lab H2C profile. Physical multicolour print: pending.
Licence of this print model: CC BY-NC-SA 4.0 International (non-commercial) - https://creativecommons.org/licenses/by-nc-sa/4.0/
Afbeelding downloadenMG_106-378-790-33 · normal · 8,704 △ · 425 KB · SHA-256 e8d15833d65fe88b
3D-model downloaden: Acetaminophen, C8H9NO2, CAS 103-90-2 · NORMAL · 425 KB
⚠️ Het logo en de naam MolGod.org, ook het verhoogde logo op de voet, zijn ons handelsmerk. Creative Commons-licenties dekken geen handelsmerken (§ 2(b)(2)). Zonder onze schriftelijke toestemming mag je het MolGod.org-logo niet gebruiken voor je eigen producten, in reclame of op een manier die onze steun suggereert.
Over Paracetamol (acetaminophen) (CAS 103-90-2)
Paracetamol (acetaminophen) (CAS 103-90-2) is een chemische verbinding, geregistreerd onder nummer CAS 103-90-2, met de brutoformule C8H9NO2, en een molaire massa van 151.16 g/mol.
Het molecuul bevat 20 atomen verbonden door 20 chemische bindingen. De volledige systematische IUPAC-naam van deze verbinding is N-(4-hydroxyphenyl)acetamide. Het interactieve 3D-model hierboven toont de ruimtelijke rangschikking van de atomen — u kunt het met de muis draaien, met het scrollwiel inzoomen en schakelen tussen de weergavemodi skelet / Ball & Stick / Space Fill.
Wat de fysisch-chemische eigenschappen betreft, de verdelingscoëfficiënt logP = 0.5 (positieve waarde, lipofiele verbinding), polair oppervlak PSA = 49.3 Ų, 2 donoren en 2 waterstofbrugacceptoren. Deze parameters zijn cruciaal bij de beoordeling van de biobeschikbaarheid en de interactie met biomoleculen.
De chemische gegevens voor deze verbinding zijn afkomstig van PubChem (NIH NLM NCBI), een van de grootste chemische databanken ter wereld. Alle informatie wordt automatisch bijgewerkt en verrijkt met vertalingen van GHS-gevarenaanduidingen conform de CLP-verordening (EG 1272/2008). Het interactieve 3D-model en de beelden van de viewer zijn auteursrechtelijk beschermd (© MolGod.org) — gebruiksvoorwaarden: molgod.org/copyright/.
Fysisch-chemische eigenschappen
| Molecular formula | C8H9NO2 |
| Molar mass | 151.16 g/mol |
| IUPAC | N-(4-hydroxyphenyl)acetamide |
| SMILES | CC(=O)NC1=CC=C(C=C1)O |
| InChIKey | RZVAJINKPMORJF-UHFFFAOYSA-N |
| logP (XLogP3) | 0.5 |
| PSA | 49.3 Ų |
| HBD / HBA | 2 / 2 |
| PubChem CID | CID 1983 ↗ |
GHS-veiligheid
Signaalwoord: Waarschuwing
H302 — Schadelijk bij inslikken.
H315 — Veroorzaakt huidirritatie.
H319 — Veroorzaakt ernstige oogirritatie.
H412 — Schadelijk voor in het water levende organismen, met langdurige gevolgen.
Wetenschappelijke literatuur
Related literature
6 articles · 5 open access · Sources: PubMed, OpenAlex, Semantic Scholar
📈 Publicatietijdlijn (aantal artikelen: 6)
Balkhoogte = aantal artikelen in het betreffende jaar. Beweeg de muis over een balk voor details.
Data from PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary generated by Semantic Scholar TLDR. Articles marked with require paid access.
Synoniemen
Gegevensbronnen
- 📊 PubChem CID 1983 — NIH
- 🔬 NIST WebBook — spectroscopie
- 💊 ChEMBL — bioactiviteit
Gerelateerde moleculen
📜 Licentie en herkomstMolGod_License_1
- Model
- Acetaminophen ·
103-90-2 - InChIKey
- RZVAJINKPMORJF-UHFFFAOYSA-N
- Licentie
- CC BY-SA 4.0 International
- Licentie van het printmodel (READY TO PRINT)
- CC BY-NC-SA 4.0 International — model met voet en potloden; de licentie hierboven geldt voor de moleculebestanden NORMAL en ENGRAVED
- Naamsvermelding
- MolGod Scientific — Acetaminophen (CAS 103-90-2)
- Licentie- en herkomstrecord
- Acetaminophen (CAS 103-90-2) →
- MolGod-molecuulrecord
- Acetaminophen →
- Brongegevens
- PubChem CID 1983 ↗
- Modelinformatie
- STL gegenereerd door MolGod ·
MolGod STL Exporter build 48804cd20b0d· gegenereerd op 2026-10-14 - SHA-256 (STL)
- e8d15833d65fe88b00a99c0937d8a8c066c9b48fc0b20f5ea6390fb655955042
- MD5 (STL)
- d6120b63c977e9052eaf3694c1f28a84
- MolGod Identification Number
- MG_106-378-790-33
- Transformatie
- MolGod Scientific bal-en-staafmodel
- Wijzigingen
- Omgezet naar een getrianguleerd moleculair mesh; atoomcoördinaten en connectiviteit ongewijzigd.
- Wikimedia Commons
- STL · PNG
Download het model, print het en gebruik het in het onderwijs. Als je een foto, lesmateriaal of bewerking publiceert, vereist de licentie CC BY-SA 4.0 International dat je „MolGod Scientific” vermeldt als maker van het model, linkt naar het origineel en naar de licentietekst, aangeeft wat je hebt gewijzigd en bewerkingen onder dezelfde licentie deelt. Een kant-en-klare naamsvermelding vind je in deze sectie. Geen registratie, geen kosten en geen verplichting om een beoordeling te geven.
Deze tekst geldt voor de moleculebestanden NORMAL en ENGRAVED. Het READY TO PRINT-model met voet valt onder CC BY-NC-SA 4.0 (niet-commercieel gebruik) — details in het tabblad READY TO PRINT. ↑
⚠️ Het logo en de naam MolGod.org, ook het verhoogde logo op de voet, zijn ons handelsmerk. Creative Commons-licenties dekken geen handelsmerken (§ 2(b)(2)). Zonder onze schriftelijke toestemming mag je het MolGod.org-logo niet gebruiken voor je eigen producten, in reclame of op een manier die onze steun suggereert.
Deze licentie geldt voor de door MolGod gemaakte STL-mesh, niet automatisch voor bronmateriaal van derden.












