Paracetamol (acetaminophen) (CAS 103-90-2)

Acetaminophen

CAS 103-90-2  ·  C8H9NO2  ·  MW 151.16 g/mol

Paracetamol (acetaminophen) (CAS 103-90-2) — full MolGod record →
Safety data sheet with all sections: GHS classification, transport, regulatory status, spectra, 3D model and literature.

Full record: Paracetamol (acetaminophen) (CAS 103-90-2) — Safety Data Sheet →

Chargement de la molécule...
Modèle 3D Acetaminophen, CAS 103-90-2, formule brute C8H9NO2, masse molaire 151.16 g/mol

Vues du modèle

  • Acetaminophen (CAS 103-90-2) – modèle 3D boules et bâtonnets, MolGod Viewer
    modèle 3D boules et bâtonnets
  • Acetaminophen (CAS 103-90-2) – modèle 3D squelettique, MolGod Viewer
    modèle 3D squelettique
  • modèle 3D compact – animation de rotation
  • Acetaminophen (CAS 103-90-2) – structure 2D, MolGod Viewer
    structure 2D

© 2026 MolGod.org. Tous droits réservés. · Droits sur les images

🖨️ Modèle à imprimer en 3D et licenceMolGod_Print3D_1

Un modèle prêt à imprimer de cette molécule sur un socle : faites-le tourner, zoomez et voyez son aspect à la sortie de l’imprimante et après le retrait des supports.

Preview of the 6-colour print model — rotate it with your mouse or finger; see it as printed, finished, as the molecule alone, and where to cut it off the pencils

Loading the 3D model…

Drag to rotate; scroll or pinch to zoom. Each part is shown in the colour of its filament.

6 colours in one print, no paintingBambu Lab H2C, 0.4 mm nozzle, 0.16 mm layersabout 166 g of PLAabout 16 h 19 min of printing (slicer estimate)Slicer-tested, multicolour test print still to come

⬇️ Print file for H2C (3MF) · 35 MBFull multicolour specification ↓

Acetaminophen (CAS 103-90-2) - 3D model ready to print on a display base, MolGod STL previewTélécharger l’image

MG_106-378-790-33 · ready to print · ANT HOUSE v7 · 390,946 △ · 19 MB · SHA-256 4f3bff329c067442

Digital geometry validated. Slicer-tested with the stated profile. Physical print not yet tested.

Taille d’impression en millimètres : importer à 100 %, ne pas redimensionner.

Paramètres d’impression 3D · ANT HOUSE v7 — géométrie numérique validée ; découpe vérifiée avec le profil ci-dessous (PrusaSlicer 2.8.1 · ANT HOUSE profile v4 (in the 3MF)) pour ce fichier précis ; aucune impression physique réalisée à ce jour.
Fichiermolgod-103-90-2-ready-to-print.stl · ANT HOUSE v7
SHA-256 4f3bff329c06744285c751551a3e7defc7c81c01b806ce2bf13bc26718b005f0
Découpé le 2026-10-29 (UTC) pour ce SHA-256
Niveau de maturitéNiveau 3 sur 5 — Vérifié au slicer (1 Généré · 2 Géométrie validée · 3 Vérifié au slicer · 4 Imprimé physiquement · 5 Qualifié pour l’impression). Conçu pour l’impression FDM. Géométrie validée, découpe vérifiée avec le profil indiqué. Aucune impression physique n’a encore été réalisée.
MéthodeFDM, PLA 1.75 mm
Buse0.4 mm (les plus petits détails sont conçus pour cette buse ; n’utilisez pas de buse plus grande)
Hauteur de couche0.2 mm
Remplissage15%, 3 périmètres
SupportsOui. 13 supports crayon (Ø 3.5 / 5 mm, hexagonaux, col « mine » Ø 1.8 mm avec coupelle à 45° sous l’atome, longueur 10.0–52.5 mm) font partie du modèle — ne les retirez pas. Activez aussi les supports automatiques du slicer : ils sont temporaires (environ 16.5 % du volume imprimé lors de notre essai) — retirez-les avec précaution près des plus petites sphères (p. ex. hydrogène) et des liaisons fines. Dans votre propre slicer : supports organiques (arbres) avec « uniquement sur le plateau » (on build plate only) DÉSACTIVÉ — chaque arbre part du socle (Cura : Support Placement = Everywhere). Après avoir choisi votre imprimante, appuyez sur A (Organiser) pour placer le modèle au centre du plateau.
TempératureProfil 3MF : 215 °C buse sur la première couche, puis 210 °C ; plateau 60 °C (point de départ — suivez la plage du fabricant du filament) ; ventilateur de pièce à partir de la couche 4. Les G-code prêts utilisent les températures et la ventilation des profils des fabricants d’imprimantes (liste : gcode/README_GCODE.txt dans le pack). G-code prêt (Prusa MK4, Prusa MINI, Creality Ender-3 S1) : buse 210 °C à la 1re couche, puis 205 °C ; plateau 60 °C — valeurs de l’en-tête de chaque fichier.
OrientationImprimer tel que fourni : socle à plat sur le plateau (face avec le code QR vers le bas) ; ne pas faire pivoter
ÉchelleImporter à 100 % — le fichier est en millimètres ; ne pas redimensionner (échelle de la molécule 1 Å = 10.14 mm)
Dimensions hors tout100.0 × 100.0 × 90.4 mm (X × Y × Z) ; socle Ø 100 × 20 mm
Validé2026-10-31 (UTC) : contrôles de géométrie de ce fichier
Plateau minimal125 × 125 mm ; hauteur 96 mm
Durée d’impression estiméeenviron 9 h 45 min (profil 3MF dans PrusaSlicer ; durées des G-code prêts ci-dessus)
Filament (PLA)environ 83–84 g (estimation du slicer)

Comment ce modèle s’imprime

Acetaminophen (CAS 103-90-2) à la sortie de l’imprimante : supports orange du slicer, crayons jaunes
À la sortie de l’imprimante : retirez les supports orange du slicer, gardez les crayons jaunes
Acetaminophen (CAS 103-90-2) modèle terminé après retrait des supports du slicer
Modèle terminé : molécule blanche sur crayons jaunes, logo MolGod en relief

Rendus (PNG) :

Acetaminophen (CAS 103-90-2) modèle 3D prêt à imprimer, Vue de face, rendu à partir du fichier STL MolGod
Vue de face
Acetaminophen (CAS 103-90-2) modèle 3D prêt à imprimer, Vue de côté, rendu à partir du fichier STL MolGod
Vue de côté
Acetaminophen (CAS 103-90-2) modèle 3D prêt à imprimer, Vue de trois quarts, rendu à partir du fichier STL MolGod
Vue de trois quarts
Acetaminophen (CAS 103-90-2) modèle 3D prêt à imprimer, Vue de dessus, rendu à partir du fichier STL MolGod
Vue de dessus
Acetaminophen (CAS 103-90-2) modèle 3D prêt à imprimer, Vue de dessous, rendu à partir du fichier STL MolGod
Vue de dessous

Pour les prestataires d’impression :
Fiche technique (PDF : plan, dimensions, spécification d’impression) · 584 KB · SHA-256 0280e3acbd205ba8…
Pack d’impression (ZIP : STL, 3MF avec réglages, G-code, instructions pas à pas, notes de conception avec sources, image « quoi retirer », aperçus, profil de slicer, rapport de contrôles, liste de contrôle qualité, formulaire de retour, licence) · 45 MB · SHA-256 f757396eabf98afa…

Télécharger le modèle 3D: Acetaminophen, C8H9NO2, CAS 103-90-2 · READY TO PRINT · 19 MB · base Ø 100 mm · single integrated solid

Paracetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, front three-quarter view
Paracetamol (acetaminophen, CAS 103-90-2) READY TO PRINT MULTICOLOR release r2 as printed: render with the slicer supports (orange) taken from the sliced G-code, all standing on the baseParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, top viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, side viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, low front viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, back viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the scissor cup under an oxygen atomParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the raised ACETAMINOPHEN / CAS 103-90-2 labelParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the raised formula C8H9NO2Paracetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, bottom viewParacetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, 30 render views from every side, top and bottom

Pictures above are renders of the print model, not photos (the second one shows it as printed, with its supports). The multicolour version has not been printed yet.

  • For Bambu Lab H2C
  • 6 colours, one print
  • 0.4 mm nozzle · 0.16 mm layers
  • 1010 filament changes
  • about 16 h 19 min
  • about 166 g of PLA

Made for one printer

This release is one print file for the Bambu Lab H2C. We have not prepared or tested it for other printers.

What you get

Paracetamol as a ball-and-stick model in six colours, printed in one go and standing on the same pencil pillars as the single-colour READY TO PRINT version: CPK atoms with element letters, red pencils with gold sharpened wood, and a white base, 100 mm across, with the blue MolGod.org logo, the raised formula C8H9NO2 and a raised ACETAMINOPHEN / CAS 103-90-2 label.

Atom colours follow the chemistry convention

Each atom shows its element symbol and the CPK colour used for molecular models in chemistry: carbon black, hydrogen white, nitrogen blue, oxygen red. CPK stands for the Corey–Pauling–Koltun space-filling models cited below. Single bonds are white. The one double bond to a heteroatom in paracetamol, the C=O of the amide group, is printed red so it stands out; the C=C double bonds of the benzene ring stay white.

Where the name CPK comes from

Where the geometry comes from

Atom positions come from the 3D conformer of paracetamol computed by PubChem (CID 1983) with the OMEGA conformer generator. It is a computed structure, not an experimental crystal structure. The MolGod engine (R3, recipe r3-1.3) scales it, orients it for printing and sets it on the base with its own pencil supports.

Sources for the 3D structure

  • Bolton, Evan E., Jie Chen, Sunghwan Kim, Lianyi Han, Siqian He, Wenyao Shi, Vahan Simonyan, Yan Sun, et al. 2011. "PubChem3D: A New Resource for Scientists." Journal of Cheminformatics 3: 32. https://doi.org/10.1186/1758-2946-3-32
  • Hawkins, Paul C. D., A. Geoffrey Skillman, Gregory L. Warren, Benjamin A. Ellingson, and Matthew T. Stahl. 2010. "Conformer Generation with OMEGA: Algorithm and Validation Using High Quality Structures from the Protein Databank and Cambridge Structural Database." Journal of Chemical Information and Modeling 50 (4): 572–584. https://doi.org/10.1021/ci100031x

Which file do I need?

There is one: the sliced 3MF for the H2C. It holds the model split into six colours, our printer, filament and support settings, and the G-code. Print it as it is, or open it in Bambu Studio, change what you like and slice again.

Print settings

Nozzle 0.4 mm on every nozzle, layer 0.16 mm, Bambu PLA Basic in six colours. Supports: regular, snug style, threshold 40°, with "remove small overhangs" switched off; a support blocker ring at the bottom edge of the base is part of the file. Of the five support settings we sliced, 40° needed the least support material while keeping every support off the build plate. All supports stand on the base or on the model. The G-code contains 1010 filament changes; Bambu Studio estimates 16 h 19 min and 166 g. Your printer and settings may differ.

Cutting the molecule off the pencils

The pencils hold the molecule during printing and can stay as a display stand. If you want the molecule on its own, each pencil ends in a small cone under the atom, the scissor cup, printed in the colour of that atom:

  1. Remove the slicer supports first (snug supports, not trees). The red pencils are part of the model and stay.
  2. Cut with flush cutters straight across the black graphite where it meets the cup. The cross-section there is about 2 mm.
  3. Cut one pencil at a time and do not twist or pull the molecule: the bonds are thin.
  4. The cut face stays in the colour of the atom. Smooth a small stub with fine sandpaper if you like.
Paracetamol (acetaminophen, CAS 103-90-2) - READY TO PRINT MULTICOLOR, 6-colour Bambu Lab H2C print model, MolGod 3D render, close-up of the scissor cup under an oxygen atom
Render: the scissor cup under an oxygen atom of paracetamol, in the atom's colour, at the tip of the pencil graphite. Not yet tried on a physical multicolour print.

Using it in class

The model can help pupils recognise atoms by colour and symbol, find the benzene ring with its hydroxyl group on one side and the amide group on the opposite side, spot the single C=O double bond in red, and compare the flat formula on the base with the 3D shape. We have not run classroom studies yet; teachers who try it are welcome to write to pure@molgod.org.

Filaments: six colours, one per nozzle (the 7th nozzle stays free)

  • Jade White 10100 · 92.7 gbase, hydrogen atoms, single bonds and the C=C bonds of the ring, letters on C, N and O
  • Black 10101 · 18.3 gcarbon atoms, pencil graphite, letters on H
  • Blue 10601 · 9.1 gthe nitrogen atom, MolGod.org logo, ACETAMINOPHEN label, CAS number, formula
  • Red 10200 · 24.0 goxygen atoms, the C=O bond, pencil bodies
  • Light Gray 10104 · 4.9 gmetal ferrules on the long pencils
  • Gold · 17.2 gsharpened wood and erasers

Downloads

Current multicolour release: r2 (5 November 2026), checked digitally and in the slicer; a physical multicolour test print is still pending. The pictures on this tab are renders.

Quality passport · release r2 · 5 November 2026

What we checked for this multicolour release, what the result was and what it is based on. A higher step is never assumed from a lower one.

  • PASSChemical identityCAS 103-90-2, C8H9NO2, InChIKey RZVAJINKPMORJF-UHFFFAOYSA-N, PubChem CID 1983. The model has 20 atoms, matching the formula (8 C, 9 H, 1 N, 2 O), each with its element letter.
  • PASSGeometry and meshOne watertight solid, 382,722 triangles, 139,123 mm³; inside it the colour parts match its volume to within 0.000005 %. 24 bond cylinders (the C=O bond and the three C=C bonds of the ring are drawn double), 13 pencils.
  • PASSMulticolour checksColour split complete: 20 atoms with letters, 24 bond cylinders, no part without a colour, no fragments. Built with the same design rules as our reference multicolour model, checked automatically before the build.
  • PASSSlicer check (Bambu Studio 02.08.02.61, H2C)Sliced without errors; 0 unsupported spots on the model; no supports on the build plate. Five support settings were sliced and compared; at 46° and with tree supports some supports reached the build plate, so 40° was chosen.
  • PASSPreview checks (molecule only, where to cut)13 cuts for 13 pencils, sharpened wood under every cut and under no other flat underside, the molecule comes off as one piece, nothing left above any cut.
  • PENDINGPhysical multicolour printNot printed yet.

Level 3 of 5 — Slicer Verified (1 Generated · 2 Geometry Validated · 3 Slicer Verified · 4 Physically Printed · 5 Print Qualified). Designed for FDM printing. Geometry validated and slicing checked using the specified profile. No physical print has been made yet.

Release r2: digital geometry checked; sliced and checked in Bambu Studio 02.08.02.61 on the Bambu Lab H2C profile. Physical multicolour print: pending.

Licence of this print model: CC BY-NC-SA 4.0 International (non-commercial) - https://creativecommons.org/licenses/by-nc-sa/4.0/

Acetaminophen (CAS 103-90-2), C8H9NO2 - 3D ball-and-stick molecular model, MolGod STL previewTélécharger l’image

MG_106-378-790-33 · normal · 8,704 △ · 425 KB · SHA-256 e8d15833d65fe88b

Télécharger le modèle 3D: Acetaminophen, C8H9NO2, CAS 103-90-2 · NORMAL · 425 KB

Licence et provenance ↓

⚠️ Le logo et le nom MolGod.org, y compris le logo en relief sur le socle, sont notre marque. Les licences Creative Commons ne couvrent pas les marques (§ 2(b)(2)). Sans notre accord écrit, vous ne pouvez pas utiliser le logo MolGod.org pour marquer vos propres produits, dans la publicité ni d’une manière suggérant notre soutien.

À propos de Paracetamol (acetaminophen) (CAS 103-90-2)

Paracetamol (acetaminophen) (CAS 103-90-2) est un composé chimique enregistré sous le numéro CAS 103-90-2, de formule brute C8H9NO2, et de masse molaire 151.16 g/mol.

La molécule contient 20 atomes reliés par 20 liaisons chimiques. Le nom systématique IUPAC complet de ce composé est N-(4-hydroxyphenyl)acetamide. Le modèle 3D interactif ci-dessus permet de visualiser l'arrangement spatial des atomes — vous pouvez le faire pivoter à la souris, zoomer avec la molette et basculer entre les modes de visualisation squelette / Ball & Stick / Space Fill.

Du point de vue des propriétés physico-chimiques, le coefficient de partage logP = 0.5 (valeur positive, composé lipophile), surface polaire PSA = 49.3 Ų, 2 donneurs et 2 accepteurs de liaisons hydrogène. Ces paramètres sont essentiels pour évaluer la biodisponibilité et l'interaction avec les biomolécules.

Les données chimiques de ce composé proviennent de PubChem (NIH NLM NCBI), l'une des plus grandes bases de données chimiques au monde. Toutes les informations sont mises à jour automatiquement et enrichies de traductions des mentions de danger GHS conformes au règlement CLP (CE 1272/2008). Le modèle 3D interactif et les images de la visionneuse sont protégés par le droit d’auteur (© MolGod.org) — conditions d’utilisation : molgod.org/copyright/.

Propriétés physico-chimiques
Molecular formulaC8H9NO2
Molar mass151.16 g/mol
IUPACN-(4-hydroxyphenyl)acetamide
SMILESCC(=O)NC1=CC=C(C=C1)O
InChIKeyRZVAJINKPMORJF-UHFFFAOYSA-N
logP (XLogP3)0.5
PSA49.3 Ų
HBD / HBA2 / 2
PubChem CIDCID 1983 ↗
Sécurité GHS

Mention d'avertissement: Attention

GHS07
GHS07
GHS09
GHS09

H302 — Nocif en cas d'ingestion.

H315 — Provoque une irritation cutanée.

H319 — Provoque une sévère irritation des yeux.

H412 — Nocif pour les organismes aquatiques, entraîne des effets néfastes à long terme.

Littérature scientifique

Related literature

6 articles · 5 open access · Sources: PubMed, OpenAlex, Semantic Scholar

Filtres :Export :📄 BibTeX📑 RIS📋 EndNote🔧 CSL-JSON

📈 Chronologie des publications (nombre d'articles : 6)

2025 : nombre d'articles 120252026 : nombre d'articles 52026

Hauteur de la barre = nombre d'articles pour l'année donnée. Survolez une barre pour afficher les détails.

Data from PubMed (NIH NLM), OpenAlex (CC0), Semantic Scholar (AI2). AI Summary generated by Semantic Scholar TLDR. Articles marked with require paid access.

Synonymes
acetaminophen · Paracetamol · 4-Acetamidophenol · 103-90-2 · N-(4-Hydroxyphenyl)acetamide · Tylenol · APAP · 4'-Hydroxyacetanilide · Datril · Panadol · N-Acetyl-p-aminophenol · Acetaminofen · Algotropyl · p-Acetamidophenol · p-Hydroxyacetanilide
Sources des données
Molécules apparentées
📜 Licence et provenanceMolGod_License_1
Modèle
Acetaminophen · 103-90-2
InChIKey
RZVAJINKPMORJF-UHFFFAOYSA-N
Licence
CC BY-SA 4.0 International
Licence du modèle à imprimer (READY TO PRINT)
CC BY-NC-SA 4.0 International — modèle avec socle et crayons ; la licence ci-dessus concerne les fichiers de la molécule NORMAL et ENGRAVED
Attribution
MolGod Scientific — Acetaminophen (CAS 103-90-2)
Fiche de licence et de provenance
Acetaminophen (CAS 103-90-2) →
Fiche moléculaire MolGod
Acetaminophen →
Données source
PubChem CID 1983 ↗
Informations sur le modèle
STL généré par MolGod · MolGod STL Exporter build 48804cd20b0d · généré le 2026-10-14
SHA-256 (STL)
e8d15833d65fe88b00a99c0937d8a8c066c9b48fc0b20f5ea6390fb655955042
MD5 (STL)
d6120b63c977e9052eaf3694c1f28a84
MolGod Identification Number
MG_106-378-790-33
Transformation
Maillage boules-et-bâtonnets MolGod Scientific
Modifications
Converti en maillage moléculaire triangulé ; coordonnées atomiques et connectivité inchangées.
Wikimedia Commons
STL · PNG
Modèle de molécule gratuit à imprimer
Téléchargez le modèle, imprimez-le et utilisez-le dans l’enseignement. Lorsque vous publiez une photo, un support ou une adaptation, la licence CC BY-SA 4.0 International exige de citer « MolGod Scientific » comme auteur du modèle, d’indiquer un lien vers l’original et vers le texte de la licence, de signaler les modifications apportées et de partager les adaptations sous la même licence. Un texte d’attribution prêt à l’emploi figure dans cette section. Sans inscription, sans frais et sans obligation de laisser un avis.
Cette note concerne les fichiers de la molécule NORMAL et ENGRAVED. Le modèle READY TO PRINT avec socle est sous licence CC BY-NC-SA 4.0 (usage non commercial) — détails dans l’onglet READY TO PRINT. ↑

⚠️ Le logo et le nom MolGod.org, y compris le logo en relief sur le socle, sont notre marque. Les licences Creative Commons ne couvrent pas les marques (§ 2(b)(2)). Sans notre accord écrit, vous ne pouvez pas utiliser le logo MolGod.org pour marquer vos propres produits, dans la publicité ni d’une manière suggérant notre soutien.

Cette licence s'applique au maillage STL créé par MolGod, et non automatiquement aux matériaux sources de tiers.

This 3D model is also published on: NIH 3D (3DPX-023797) · Wikimedia Commons
Included in datasets: OSF project index
Source structure: PubChem (CID 1983)
—