Isopropyl Myristate (CAS 110-27-0)

Изопропилмиристат. CAS 110-27-0.

Free, and generated automatically from the sources listed on this page. No person has reviewed it, and it describes the substance in general — not your material, your process or your intended market.

REACH 2020/878
v2 · 21.10.2026

Rubrique 9 — propriétés physico-chimiques : 8 sur 22 établies.

Nous montrons ce qui est établi et signalons ce qui ne l'est pas. La classification et l'identité sont complètes sur chaque fiche ; c'est à la section 9 que les données publiques sont rares.

DOCUMENTATION ET MODÈLES IMPRIMÉS EN 3D UNIQUEMENT

Cette page propose de la documentation relative à la substance indiquée. MolGod ne vend ni ne fournit la substance chimique elle-même.

Données scientifiques · Acheteur · Conformité

Cette page vend la documentation de cette substance, et non la substance elle-même. Choisissez le niveau dont vous avez besoin.

  1. €0Audit de la fiche dont vous disposez déjàEnvoyez-nous la fiche dont vous disposez pour cette substance et nous vous indiquons ce qui ne va pas. Un audit par entreprise. Si elle s’avère correcte, vous n’achetez rien.Lancer l’audit gratuit →
  2. €49.99Version de travailLe document complet en seize sections, référencé, téléchargeable immédiatement après la commande. Le bon choix tant que le dossier est encore en cours.
  3. €249.99Fiche signéeLe même document, vérifié et signé, délivré sous 72 heures après réception d’informations complètes — pour le moment où une autorité demande qui en répond.

Documentation disponible pour cette substance : fiche de données de sécurité · étiquette CLP · certificat d’analyse sur demande · spécification. Langues : la langue officielle de votre marché de destination, produite pour chaque fiche.

La qualité, la pureté, la forme physique, le conditionnement, la quantité minimale de commande et le délai de livraison ne sont pas indiqués, car MolGod ne fournit pas la matière — ce sont des informations propres à un vendeur, et il n’y a pas de vendeur sur cette page. Elles figurent sur les boutiques que nous construisons pour les fournisseurs, où quelqu’un peut en répondre.

Voir d’abord un document finaliséGrille tarifaire complète →

Ce que vous recevez — et ce que ce n'est pas

Ce que vous recevez

  • Une fiche de données de sécurité numérique au format PDF, selon la structure en seize sections de l'annexe II de REACH (règlement 1907/2006).
  • Identification de la substance, classification des dangers, informations physico-chimiques, toxicologiques et écologiques, et références réglementaires.
  • Classification lue au regard de l’entrée harmonisée de l’annexe VI du CLP, lorsqu’elle existe pour la substance.
  • Un numéro de version, une date d'établissement et la source de chaque valeur qui en comporte une.
  • Livraison par e-mail. Aucun envoi physique.

Ce que ce n'est pas

  • Ni substance chimique, ni échantillon, ni aucun bien physique.
  • Ce n’est pas une certification. Il n’existe aucun dispositif officiel de certification des fiches de données de sécurité dans l’Union européenne.
  • Ni une approbation juridique, ni une garantie de conformité dans quelque juridiction que ce soit.
  • Ne remplace ni votre propre évaluation réglementaire, ni la fiche de données de sécurité fournie par le fabricant ou l’importateur de la substance que vous détenez réellement.
  • Sans adaptation à un lieu de travail, un procédé ou une annexe nationale spécifique, sauf si vous fournissez ces informations.

Lorsque les éléments disponibles ne permettent pas d'étayer une valeur, la fiche indique que la valeur n'est pas établie au lieu de l'estimer. Un champ sans source enregistrée est signalé comme tel.

Contenu du dossier acheteur

Tout ce que votre responsable conformité demandera, dans un seul fichier.

  • La page produit en PDF — l’enregistrement tel que publié, pour que ce que vous transmettez corresponde à ce que vous lisez.
  • La fiche de données de sécurité correspondant à votre niveau d’accès — seize sections dans l’ordre fixé par l’annexe II du règlement REACH, pour cette substance, dans la langue que vous choisissez.
  • La maquette de l’étiquette CLP — générée à partir de la même classification que la fiche, de sorte que les deux ne peuvent pas se contredire.
  • La spécification, ainsi que le certificat d’analyse lorsque des données de lot existent.
  • sources.txt — chaque citation avec la date à laquelle elle a été consultée.
  • Une liste explicite de ce que nous n’avons pas pu établir — des champs marqués comme non disponibles plutôt que remplis par une estimation. C’est la partie honnête du document, et nous ne la cachons pas dans une note de bas de page.

Votre acheteur européen va transmettre ceci à quelqu’un qui n’était pas à la réunion. Le dossier existe pour que ce qu’il transmet soit complet, compréhensible en soi et traçable — plutôt que quatre pièces jointes et une phrase commençant par “Je pense que c’est tout”.

À propos des versions linguistiques

Ils changent la langue de cette page. Single substances. Mixtures on enquiry. One document, one language — additional languages are priced separately. Every version, including the Chinese one, is written to EU law — (EC) No 1907/2006 (REACH) Annex II and (EU) 2020/878 — and translated from it. The Chinese version is a reference translation, not a legally valid document for the Chinese market: an SDS for China must be compiled separately to GB/T 16483 and GB/T 17519.

🧬 Visualiseur de molécule 3D
Chargement de la molécule...
Modèle 3D Isopropyl Myristate, CAS 110-27-0, formule brute C17H34O2, masse molaire 270.5 g/mol

Vues du modèle

  • Isopropyl Myristate (CAS 110-27-0) – modèle 3D boules et bâtonnets, MolGod Viewer
    modèle 3D boules et bâtonnets
  • Isopropyl Myristate (CAS 110-27-0) – modèle 3D squelettique, MolGod Viewer
    modèle 3D squelettique
  • modèle 3D compact – animation de rotation
  • Isopropyl Myristate (CAS 110-27-0) – structure 2D, MolGod Viewer
    structure 2D

© 2026 MolGod.org. Tous droits réservés. · Droits sur les images

Données transcrites à partir de registres réglementaires et de la littérature spécialisée, avec indication de la source et de l'édition. Elles ne remplacent pas la fiche de données de sécurité du fournisseur. Les champs sans source enregistrée sont signalés comme tels.

🖨️ Modèle à imprimer en 3D et licence
Isopropyl Myristate (CAS 110-27-0), C17H34O2 - 3D ball-and-stick molecular model, engraved element symbols (C H O), MolGod STL previewTélécharger l’image

MG_120-056-815-62 · engraved · 569,862 △ · 27 MB · SHA-256 0d3df28941d18208

Télécharger le modèle 3D · ENGRAVED · C H O

Isopropyl Myristate (CAS 110-27-0), C17H34O2 - 3D ball-and-stick molecular model, MolGod STL previewTélécharger l’image

MG_120-056-815-62 · normal · 22,048 △ · 1 MB · SHA-256 7c6c4ae4f44da805

Télécharger le modèle 3D

Licence et provenance ↓

⚠️ Le nom et le logo MolGod.org, y compris le logo en relief sur le socle, sont notre marque. La licence CC BY-SA 4.0 ne couvre pas les marques (section 2(b)(2)). Sans notre autorisation écrite, le logo MolGod.org ne peut pas servir à marquer vos propres produits, ni être utilisé dans la publicité ou d’une manière suggérant notre caution.

📊 Données physicochimiques — CAS 110-27-0
📊 Propriétés physicochimiques

Aperçu rapide

Formule : C17H34O2
MW : 270.5 g/mol
CAS : 110-27-0
Odeur : Praktycznie bezwonny
🔬 Propriétés avancées

Identifiants chimiques

SMILES: CCCCCCCCCCCCCC(=O)OC(C)C

Dernière mise à jour : 2026-09-02

Aperçu chimique: Isopropyl Myristate
Formule bruteC17H34O2[1]
Masse moléculaire270.5 g/mol[1]
LogP (lipophilie)7.2[1]
Nom IUPACpropan-2-yl tetradecanoate[1]
SMILESCCCCCCCCCCCCCC(=O)OC(C)C[1]
InChIKeyAXISYYRBXTVTFY-UHFFFAOYSA-N[1]

Synonymes: ISOPROPYL MYRISTATE · 110-27-0 · Isopropyl tetradecanoate · Isomyst · Estergel

Sources de données : PubChem (NLM/NIH)
Dernière mise à jour : 2026-09-03

📚 Références scientifiques (Chicago Author-Date) (1 sources)
  1. PubChem. National Center for Biotechnology Information (NIH/NLM), chemical compound database. ↗ s'applique à : Formule brute · Masse moléculaire · LogP (lipophilie) · Nom IUPAC · SMILES · InChIKey

RECHERCHE SCIENTIFIQUE

[1]PubMed2008
Ambade KW, Jadhav SL, Gambhire MN et al.. (2008). "Formulation and evaluation of flurbiprofen microemulsion.". Current drug delivery. https://doi.org/10.2174/156720108783331032
[2]PubMed2007
Garner ST Jr, Israel BJ, Achmed H et al.. (2007). "Transdermal permeability of N-acetyl-D-glucosamine.". Pharmaceutical development and technology. https://doi.org/10.1080/10837450701212560
[3]PubMed2005
Abraham MH, Acree WE Jr. (2005). "Characterisation of the water-isopropyl myristate system.". International journal of pharmaceutics. https://doi.org/10.1016/j.ijpharm.2005.01.028
[4]PubMed2003
Gloor M, Haus G, Keipert S. (2003). "Keratolytic activity of microemulsions.". Skin pharmacology and applied skin physiology. https://doi.org/10.1159/000069753
📚 Références scientifiques (Chicago Author-Date) 1 refs · 1 baz

MOLECULE Bibliographie par CAS (en direct depuis 13+ bases de données)

Sources : db:pubmed (1)

  1. db:pubmed Abraham MH, Acree WE Jr. (2005). "Characterisation of the water-isopropyl myristate system.". International journal of pharmaceutics. https://doi.org/10.1016/j.ijpharm.2005.01.028 →
Statut réglementaire de la substance
Cette substance est soumise à des exigences réglementaires : gestion des déchets dangereux (BDO — règle nationale, Pologne). Détails dans la section « Statut réglementaire (REACH/ECHA/CLP) » et sur la FDS. Information réglementaire — ne restreint pas l'achat dans la boutique.
🧮 Calculateur stœchiométrique
🧪 Données chimiques
Numéro CAS
110-27-0
Formule brute
C17H34O2
Masse molaire
270.5 g/mol
Nom IUPAC (EN)
propan-2-yl tetradecanoate
SMILES
CCCCCCCCCCCCCC(=O)OC(C)C
InChIKey
AXISYYRBXTVTFY-UHFFFAOYSA-N
📡 Data sources

The data in this widget comes from the following verified scientific sources:

  • PubChem — National Center for Biotechnology Information (NCBI/NIH), USA
  • ChEMBL — European Bioinformatics Institute (EMBL-EBI), UK
  • NIST WebBook — National Institute of Standards and Technology, USA

Data is cached locally for speed — the widget also works offline.

⚗️ Physicochemical properties
Density
0.853

Source: PubChem, NIST WebBook. Last updated: 2026-09-02

🔍 Identifiants externes
12 sur 16 systèmes d'ID75%
Base de donnéesIdentifiantActions
CAS Registry Number110-27-0Ouvrir →
PubChem CID8042[1]Ouvrir →
InChIKeyAXISYYRBXTVTFY-UHFFFAOYSA-N[1]Ouvrir →
SMILESCCCCCCCCCCCCCC(=O)OC(C)C[1]
EC Number203-751-4[2]Ouvrir →
DrugBankDB13966Ouvrir →
KEGG CompoundD02296Ouvrir →
HMDBHMDB0040392Ouvrir →
ChemSpider7751[3]Ouvrir →
UNII (FDA)0RE8K4LNJSOuvrir →
NSC Number (NCI)406280Ouvrir →
WikiData QIDQ416222Ouvrir →

Sources : PubChem (NIH), Wikidata SPARQL, KEGG, ChEMBL (EBI), CompTox CTX (EPA).

📚 Références scientifiques (Chicago Author-Date) (3 sources)
  1. PubChem. National Center for Biotechnology Information (NIH/NLM), chemical compound database. ↗ s'applique à : PubChem CID · InChIKey · SMILES
  2. ECHA. EC Inventory — EINECS, ELINCS, NLP and List Numbers assigned under REACH. Helsinki: European Chemicals Agency. ↗ s'applique à : EC Number
  3. ChemSpider. Royal Society of Chemistry, chemical structure database. ↗ s'applique à : ChemSpider
📡 Spectroscopie — CAS 110-27-0
📊 Spectres (NMR, IR, MS, UV-Vis) (1)

Types de spectres disponibles : IR

Spectre IR (KBr, 4000-400 cm⁻¹)

440 points de données · Source : NIST WebBook · NIST ↗ · 📥 JCAMP-DX
🎓 Guide d'interprétation des spectres (pour étudiants)
Comment lire un spectre IR
  • 3200-3600 cm⁻¹ — élongation O-H (pic large = liaison hydrogène)
  • 2850-3000 cm⁻¹ — élongation C-H (sp³)
  • 1650-1750 cm⁻¹ — élongation C=O (cétones, aldéhydes, esters)
  • 1400-1600 cm⁻¹ — vibrations du cycle aromatique
  • 1000-1300 cm⁻¹ — élongation C-O (éthers, alcools)
  • Aucune absorption = aucun groupe fonctionnel → comparer avec une référence

Sources : LibreTexts ↗, Silverstein (Spectrometric ID) ↗

📚 Références scientifiques (Chicago Author-Date) (7 sources)
  1. National Institute of Standards and Technology. 2024. "NIST Chemistry WebBook, SRD 69." Gaithersburg, MD: NIST. Accessed 2025-01-01. ↗
  2. Spectral Database for Organic Structure Determination (SDBS). 2024. National Institute of Advanced Industrial Science and Technology (AIST), Japan. Accessed 2025-01-01. ↗
  3. Ulrich, Eldon L., Hideo Akutsu, John F. Doreleijers, Yoko Harano, Yannis E. Ioannidis, Jundong Lin, Miron Livny, et al. 2008. "BioMagResBank." Nucleic Acids Research 36 (D1): D402–D408. [DOI ↗]
  4. Horai, Hisayuki, Masanori Arita, Shigehiko Kanaya, Yoshito Nihei, Tasuku Ikeda, Kazuhiro Suwa, Yuya Ojima, et al. 2010. "MassBank: A Public Repository for Sharing Mass Spectral Data for Life Sciences." Journal of Mass Spectrometry 45 (7): 703–714. [DOI ↗]
  5. Linstrom, P.J., and W.G. Mallard, eds. 2024. NIST Chemistry WebBook, NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. ↗
  6. McDonald, M. Shane, Mike McAvoy, and Ajit Bhalerao. 1988. "JCAMP-DX: A Standard Form for Exchange of Infrared Spectra in Computer Readable Form." Applied Spectroscopy 42 (1): 151–162. [DOI ↗]
  7. PubChem. 2024. "PubChem Compound Database." National Library of Medicine, National Institutes of Health. Accessed 2025-01-01. ↗
Propriétés structurelles
ParamètreValeurUnité
Formule moléculaireC17H34O2
Masse molaire270.5g/mol
Masse exacte270.255880323Da
Masse monoisotopique270.255880323Da
Surface polaire topologique (TPSA)26.3000Ų
XLogP37.2000
Indice de complexité199
Donneurs de liaisons hydrogène0
Accepteurs de liaisons hydrogène2
Liaisons rotables14
Atomes lourds19
Centres stéréogènes (atomes)0
Centres stéréogènes (liaisons)0
Volume 3D241.8000ų
Nombre de conformères 3D10
RMSD du modèle de conformère1.2000Å
Rotors 3D effectifs14
Accepteurs de liaisons hydrogène (3D)1
Donneurs de liaisons hydrogène (3D)0
Cycles (3D)0
Centres hydrophobes (3D)2
Quadrupôle stérique 3D (X/Y/Z)32.69 / 2.18 / 0.75Ų

Source : Propriétés calculées PubChem, CID 8042

❓ Questions fréquentes (5)
What is Isopropyl Myristate?
Isopropyl Myristate (CAS 110-27-0) is a chemical compound with the molecular formula C17H34O2 and a molecular weight of 270.5 g/mol. The chemical data comes from PubChem (National Institutes of Health, USA).
Utile ?
What is the CAS number of Isopropyl Myristate?
The CAS number for Isopropyl Myristate is 110-27-0. A CAS Registry Number is the standard identifier for a chemical substance in scientific literature and in trade.
Utile ?
What is the chemical formula of Isopropyl Myristate?
The molecular formula of Isopropyl Myristate is C17H34O2. Its molecular weight is 270.5 g/mol.
Utile ?
What is the density of Isopropyl Myristate?
The density of Isopropyl Myristate is 0.853.
Utile ?
How should Isopropyl Myristate be stored?
Isopropyl Myristate should be stored as its safety data sheet directs — typically in a dry, cool, well-ventilated place, away from heat and from materials it is incompatible with.
Utile ?
➕ Proposer une question
Télécharger les fichiers de structure

Fichiers de structure moléculaire issus de la base PubChem (NIH). Compatibles avec les logiciels : Avogadro, PyMOL, Jmol, ChemDraw.

Source : PubChem, National Library of Medicine (NIH). CID: 8042

🔄 Convertisseur d'unités de concentration LIVE

Saisissez la concentration Isopropyl Myristate dans n'importe quelle unité — le reste sera calculé automatiquement.

MW : 270.5 g/mol · IUPAC Gold Book ↗

⚗️ Formules de conversion + citations (par formule)
ConversionFormulePrécisionSource
% (w/v) ↔ molarityc (mol/L) = (% × 10) / MW±0.5% rel. when density ≈ 1.0 g/mLIUPAC (2019)
millimolar ↔ molarc (mol/L) = mM × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
molarity (mol/L)c = n/V = (m/MW)/V±0.1% (depends on MW precision)IUPAC (2019)
parts per million (mg/L) ↔ molarityc (mol/L) = ppm / (1000 × MW); equivalently ppm = mg/L for dilute aqueous±1% (density-independent for dilute solutions)IUPAC (2019)
mg/mL ↔ molarityc (mol/L) = (mg/mL × 1000) / MW / 1000 = mg/mL / MW × 1±0.2%Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
g/L ↔ molarityc (mol/L) = (g/L) / MW±0.1% (depends on MW precision)Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
mmol/L ↔ molarityc (mol/L) = mmol/L × 10⁻³ExactCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
Celsius ↔ KelvinT(K) = t(°C) + 273.15±0.01 K (ITS-90 scale)BIPM (Bureau International des Poids et Mesures) (2019)
Celsius ↔ FahrenheitT(°F) = T(°C) × 9/5 + 32±0.1 °FThompson A, Taylor BN (2008)
density-corrected % ↔ molarityc (mol/L) = (%w/w × ρ × 10) / MW, ρ in g/mL±0.1% when ρ known to 3 decimalsCohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007)
📚 Bibliographie (8 sources faisant autorité)
  1. Thompson A, Taylor BN (2008). Guide for the Use of the International System of Units (SI). NIST Special Publication 811 · DOI: 10.6028/NIST.SP.811e2008
    → Primary SI standard for US scientific usage
  2. Cohen ER, Cvitaš T, Frey JG, Holmström B, Kuchitsu K, Marquardt R, Mills I, Pavese F, Quack M, Stohner J, Strauss HL, Takami M, Thor AJ (2007). Quantities, Units and Symbols in Physical Chemistry — The IUPAC Green Book. RSC Publishing, 3rd ed. · DOI: 10.1039/9781847557889 · ISBN: 978-0-85404-433-7
    → Canonical IUPAC guide for chemistry quantities/units
  3. BIPM (Bureau International des Poids et Mesures) (2019). The International System of Units (SI), 9th edition. BIPM · ↗
    → International SI definitions (incl. redefined kilogram 2019)
  4. ISO/IEC (2022). Quantities and units — Part 1: General. International Organization for Standardization — ISO 80000-1:2022 · ↗
    → General rules for physical quantities and units
  5. ISO/IEC (2019). Quantities and units — Part 9: Physical chemistry and molecular physics. International Organization for Standardization — ISO 80000-9:2019 · ↗
    → Concentration / molality / amount-of-substance conventions
  6. Tiesinga E, Mohr PJ, Newell DB, Taylor BN (2021). CODATA recommended values of the fundamental physical constants: 2018. Rev. Mod. Phys. 93(2):025010 · DOI: 10.1103/RevModPhys.93.025010
    → Avogadro, gas constant, molar volume (2019 SI revision)
  7. IUPAC (2019). Compendium of Chemical Terminology — the IUPAC Gold Book (online). IUPAC · DOI: 10.1351/goldbook
    → Definitions of mass fraction, molality, normality, ppm, activity
  8. Mills IM, Cvitaš T, Homann K, Kallay N, Kuchitsu K (1988). Quantities, Units and Symbols in Physical Chemistry. Blackwell Scientific Publications, 1st ed. · ISBN: 0-632-01773-5
    → Historical predecessor of IUPAC Green Book
Structures moléculaires similaires

Chargement des structures similaires...

🧪 Assistant de préparation de solution WIZARD
① Sélectionnez la concentration
② Volume cible
③ Solvant

Calculs selon : IUPAC Gold Book ↗, Merck ↗

Chimie computationnelle

Descripteurs moléculaires

ParamètreValeurUnité
XLogP3 (lipophilie)7.20
lipophile (préfère la phase organique)
Surface polaire topologique (TPSA)26.30Ų
faible polarité, bonne pénétration de la barrière hémato-encéphalique
Indice de complexité199.0
Charge formelle0
molécule neutre

Règle de Lipinski (Rule of Five)

CritèreValeurRègleStatut
Masse molaire270.50 g/mol<= 500✓
XLogP37.20<= 5✗
Donneurs de liaisons hydrogène0<= 5✓
Accepteurs de liaisons hydrogène2<= 10✓

Le composé satisfait à la règle de Lipinski — biodisponibilité orale potentiellement bonne.

Caractéristiques pharmacophoriques 3D

ParamètreValeurUnité
Accepteurs de liaisons hydrogène (3D)1
Donneurs de liaisons hydrogène (3D)0
Cycles (3D)0
Centres hydrophobes (3D)2
Centres anioniques (3D)0
Centres cationiques (3D)0

Forme et volume

ParamètreValeurUnité
Volume 3D241.80ų
Liaisons rotables14
Atomes lourds19

Les interprétations de la TPSA et la règle de Lipinski sont des règles empiriques pour les médicaments oraux de faible masse moléculaire (Lipinski 1997, Veber 2002, Kelder 1999). Elles ne constituent pas une évaluation de l'absorption ni de la toxicité de cette substance — les données de sécurité figurent dans la fiche de données de sécurité.

Source : Propriétés calculées PubChem, CID 8042

🛡️ Sécurité — CAS 110-27-0
Avis sur les limitations des données. Les informations de sécurité figurant sur cette page sont fournies à titre indicatif et ne remplacent pas une fiche de données de sécurité (SDS) complète. Avant d'utiliser le produit, consultez la fiche de données de sécurité actuelle du fabricant ainsi que les directives GHS/CLP. La classification CLP s'applique à la substance pure en vrac, et non aux préparations commerciales.

Classification GHS/CLP — Règlement (CE) n° 1272/2008 + UN GHS Rev. 9 (2021).

⚠ Attention (Warning)
GHS07 — Irritant / nocif
GHS07 Irritant / nocif

🚨 Mentions de danger (H)

  • H315 — Provoque une irritation cutanée.

🛡 Conseils de prudence (P)

  • P264 — Se laver … soigneusement après manipulation.

⚠ Classification basée sur un consensus de sources (PubChem / déclarations des fournisseurs) — non vérifiée par rapport à la classification harmonisée de l'annexe VI (CLP). L'étendue des dangers peut être plus large que la classification officielle ; avant utilisation, vérifier avec la fiche de données de sécurité actuelle du fournisseur.

Traductions : Règlement CLP (CE) 1272/2008, Annexe III et IV. Données : PubChem/NLM.

📚 Références scientifiques consolidées — Chicago auteur-date 10 sources

Références collectées dans tous les onglets du Safety Hub. CAS : 110-27-0 · PubChem ↗

  1. Parlament Europejski i Rada UE. 2008. "Regulation (EC) nr 1272/2008 w sprawie klasyfikacji, oznakowania i pakowania substancji (CLP)." Dz.Urz. UE L 353. [↗] GHS, Réglementations
  2. United Nations Economic Commission for Europe (UNECE). 2021. "Globally Harmonized System of Classification and Labelling of Chemicals (GHS), Ninth Revised Edition." United Nations, Geneva. [↗] GHS
  3. Goldfrank, Lewis R., Robert S. Hoffman, Mary Ann Howland, et al.. 2019. "Goldfrank's Toxicologic Emergencies, 11th ed.." McGraw-Hill Education, New York. ISBN 978-1-25-985961-8. Premiers secours, Toxicologie
  4. National Institute for Occupational Safety and Health (NIOSH). 2023. "NIOSH Pocket Guide to Chemical Hazards (DHHS Publ. 2005-149)." U.S. Department of Health and Human Services / CDC, Cincinnati, OH. [↗] Premiers secours, EPI, Toxicologie
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms." CEN, Brussels. [↗] EPI
  6. UNECE. 2023. "European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." United Nations, Geneva. [↗] Élimination, Réglementation
  7. National Fire Protection Association (NFPA). 2022. "NFPA 400 — Hazardous Materials Code." NFPA, Quincy, MA. [↗] Stockage
  8. Urben, P.G. (ed.). 2017. "Bretherick's Handbook of Reactive Chemical Hazards, 8th ed.." Butterworth-Heinemann / Elsevier, Oxford. [↗] Stockage
  9. Ministerstwo Klimatu i Środowiska RP. 2023. "Baza danych o produktach i opakowaniach oraz o gospodarce odpadami (BDO)." Ministerstwo Klimatu i Środowiska, Warszawa. Règles nationales — Pologne [↗] Élimination
  10. International Agency for Research on Cancer (IARC / WHO). 2024. "IARC Monographs on the Identification of Carcinogenic Hazards to Humans — List of Classifications." WHO, Lyon. [↗] Toxicologie

Les onglets possédant leurs propres références (Emergency, PPE, Storage, Waste) contiennent des entrées bibliographiques supplémentaires au sein de leurs sections respectives.

📈 Statistiques analytiques (test t · RSD · Grubbs · Q-Dixon) ICH Q2

Collez une série de mesures répétées (CSV ou un nombre par ligne). Le calculateur calculera la moyenne, l'écart-type, l'IC à 95 %, et détectera les valeurs aberrantes (Grubbs + Dixon Q).

Séparateur : virgule, espace, tabulation, nouvelle ligne. Min. 3 mesures.
📐 Formules statistiques
  • x̄ = Σxᵢ / n — moyenne arithmétique
  • s² = Σ(xᵢ - x̄)² / (n-1) — variance de l'échantillon
  • s = √s² — écart-type
  • RSD% = (s / x̄) × 100% — écart-type relatif
  • CI₉₅ = x̄ ± t(0.05, n-1) × s / √n — Student's t
  • G = |xᵢ - x̄| / s — test de Grubbs
  • Q = |xsuspect - xnearest| / |xmax - xmin| — Dixon Q-test

Source : ICH Q2(R2) Validation of Analytical Procedures · ICH PDF ↗

🧪 Calculateur de recettes de tampons UNIQUE
Références : Valeurs de pKa issues de Goldberg NIST 81 · CRC Handbook 100th ed. · Stoll & Blanchard 1990 (DOI)

Choisissez un tampon dans la liste de 20 systèmes courants → saisissez le pH cible → vous obtiendrez une recette exacte avec les masses à peser.

Étape 1 : Choisissez un système tampon

📜 Historique des recettes (10 dernières)
📅 Project Planner — Gestionnaire d'expériences de laboratoire NOUVEAU

Planifiez l'ensemble de votre projet de laboratoire : ajoutez des expériences avec réactifs, réplicats et durée. Vous obtiendrez un diagramme de Gantt, une liste d'achats (avec des liens vers la boutique !), un budget avec une marge de 10 % et une matrice de risques GHS.

🧪 Solubilité et compatibilité avec les solvants
Molécule
Isopropyl Myristate
Formule
C17H34O2
logP (XLogP3)
7.20
Masse (g/mol)
270.5
Polarité
Hydrophobe (apolaire)

⚠️ Estimation GC (Hoftyzer-Van Krevelen). Aucune donnée HSP de la littérature pour ce CAS — précision ±2 MPa½. À vérifier expérimentalement.

Tableau de compatibilité des solvants non disponible pour cette substance.
Les paramètres de Hansen sont hors du domaine de la méthode : la distance Ra ne peut donc pas être calculée, et la base de données ne contient aucune mesure de solubilité pour la remplacer. Plutôt que onze évaluations sans fondement, nous n’en affichons aucune. Fondez le choix du solvant sur la fiche de données de sécurité et sur des données expérimentales.
📚 Références scientifiques pour les solvants (Chicago Author-Date) — cliquez pour développer

11 solvants · 54 citations complètes (NIST/CRC/IARC/Hansen/Reichardt/Smallwood/Wypych/Armarego/Snyder/GESTIS) — ci-dessous.

Water (H₂O)
  1. NIST — NIST Chemistry WebBook — Water (CAS 7732-18-5)
  2. CRC — CRC Handbook of Chemistry and Physics, 104th ed., Sec. 8 (Properties of Water)
  3. IAPWS — IAPWS Release on Static Dielectric Constant of Water
  4. Reichardt 2011 — Solvents and Solvent Effects in Organic Chemistry
  5. GESTIS — GESTIS Substance Database — Water
Ethanol (EtOH)
  1. NIST — NIST Chemistry WebBook — Ethanol (CAS 64-17-5)
  2. CRC — CRC Handbook — Ethanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — Ethanol eluotropic
  4. Smallwood — Handbook of Organic Solvent Properties — Ethanol
  5. GESTIS — GESTIS Substance Database — Ethanol
Methanol (MeOH)
  1. NIST — NIST Chemistry WebBook — Methanol (CAS 67-56-1)
  2. CRC — CRC Handbook — Methanol physical constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — MeOH eluotropic, eo=0.95
  4. GESTIS — GESTIS Substance Database — Methanol
Acetone
  1. NIST — NIST Chemistry WebBook — Acetone (CAS 67-64-1)
  2. CRC — CRC Handbook — Acetone physical & thermodynamic constants
  3. Hansen 2007 — Hansen Solubility Parameters — Acetone (dD=15.5, dP=10.4, dH=7.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Acetone
  5. GESTIS — GESTIS Substance Database — Acetone
Acetonitrile (ACN)
  1. NIST — NIST Chemistry WebBook — Acetonitrile (CAS 75-05-8)
  2. CRC — CRC Handbook — Acetonitrile constants
  3. Snyder & Kirkland — Modern Liquid Chromatography — ACN gold-standard HPLC eluent
  4. Reichardt 2011 — Solvents and Solvent Effects — ACN dipolar aprotic
  5. GESTIS — GESTIS Substance Database — Acetonitrile
DMSO
  1. NIST — NIST Chemistry WebBook — DMSO (CAS 67-68-5)
  2. Wypych 2019 — Handbook of Solvents Vol. 1 — DMSO comprehensive properties
  3. Hansen 2007 — HSP — DMSO (dD=18.4, dP=16.4, dH=10.2)
  4. Reichardt 2011 — Solvents and Solvent Effects — DMSO E_T(30)=45.1, dipolar aprotic
  5. GESTIS — GESTIS Substance Database — DMSO
THF
  1. NIST — NIST Chemistry WebBook — THF (CAS 109-99-9)
  2. Armarego 2009 — Purification of Laboratory Chemicals — THF drying & peroxide test
  3. Hansen 2007 — Hansen Solubility Parameters — THF (dD=16.8, dP=5.7, dH=8.0)
  4. Smallwood — Handbook of Organic Solvent Properties — THF
  5. GESTIS — GESTIS Substance Database — Tetrahydrofuran
DCM (CH₂Cl₂)
  1. NIST — NIST Chemistry WebBook — Dichloromethane (CAS 75-09-2)
  2. IARC 71 — IARC Monograph 71 — DCM (Group 2A carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — DCM (dD=18.2, dP=6.3, dH=6.1)
  4. Reichardt 2011 — Solvents and Solvent Effects — DCM polarity index
  5. GESTIS — GESTIS Substance Database — Dichloromethane
Chloroform (CHCl₃)
  1. NIST — NIST Chemistry WebBook — Chloroform (CAS 67-66-3)
  2. IARC 73 — IARC Monograph 73 — Chloroform (Group 2B carcinogen)
  3. Hansen 2007 — Hansen Solubility Parameters — CHCl3 (dD=17.8, dP=3.1, dH=5.7)
  4. Reichardt 2011 — Solvents and Solvent Effects — CHCl3 H-bond donor strength
  5. GESTIS — GESTIS Substance Database — Chloroform
n-Hexane
  1. NIST — NIST Chemistry WebBook — n-Hexane (CAS 110-54-3)
  2. ATSDR n-Hexane — ATSDR Toxicological Profile for n-Hexane — neuropathie périphérique (le n-hexane N'EST PAS un cancérogène selon le CIRC)
  3. Hansen 2007 — Hansen Solubility Parameters — n-Hexane (dD=14.9, dP=0, dH=0)
  4. Snyder & Kirkland — Modern Liquid Chromatography — n-Hexane NP standard, eo=0.00
  5. GESTIS — GESTIS Substance Database — n-Hexane
Toluene
  1. NIST — NIST Chemistry WebBook — Toluene (CAS 108-88-3)
  2. IARC 71 — IARC Monograph 71 — Toluene
  3. Hansen 2007 — Hansen Solubility Parameters — Toluene (dD=18.0, dP=1.4, dH=2.0)
  4. Smallwood — Handbook of Organic Solvent Properties — Toluene
  5. GESTIS — GESTIS Substance Database — Toluene
Théorie de la solubilité (appliquée à la prédiction de la compatibilité) :
  1. Yalkowsky, Samuel H., and Shri C. Valvani. 1980. "Solubility and Partitioning I: Solubility of Nonelectrolytes in Water." Journal of Pharmaceutical Sciences 69 (8): 912–922. https://doi.org/10.1002/jps.2600690814 — General Solubility Equation (GSE): logS = 0.5 − logP − 0.01(MP−25).
  2. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook. 2nd ed. CRC Press. https://doi.org/10.1201/9781420006834 — Triplet HSP (dD, dP, dH) + formule Ra.
  3. Stefanis, E., and C. Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." Int J Thermophys 29: 568–585. https://doi.org/10.1007/s10765-008-0415-z
  4. Reichardt, Christian, and Thomas Welton. 2011. Solvents and Solvent Effects in Organic Chemistry. 4th ed. Wiley-VCH. https://doi.org/10.1002/9783527632220 — E_T(30) polarity scale, solvatochromism.
  5. Snyder, Lloyd R., Joseph J. Kirkland, and John W. Dolan. 2010. Introduction to Modern Liquid Chromatography. 3rd ed. Wiley. https://doi.org/10.1002/9780470508183 — Eluotropic series, polarity index.
  6. Van Krevelen, D. W., and K. Te Nijenhuis. 2009. Properties of Polymers. 4th ed. Elsevier. https://doi.org/10.1016/B978-0-08-054819-7.X0001-5 — Hoftyzer–Van Krevelen group contribution for dD/dP/dH from SMILES.
  7. Marcus, Yizhak. 1998. The Properties of Solvents. Wiley Series in Solution Chemistry, Vol. 4. ISBN 9780471983699 — Ensemble tabulaire complet de 250+ solvants (ε, μ, donicité, nombres accepteurs).
  8. PubChem Compound Database — CAS 110-27-0 lookup ↗ — logP (XLogP3), water solubility experimental + predicted.

Bibliographie complète dans l'accordéon RÉFÉRENCES (en bas de la page) — Chicago Manual of Style 17th ed., Author-Date.

⚗️ Vérifier la compatibilité de la réaction
1 0 0
Santé : 1/4
Inflammabilité : 0/4
Réactivité : 0/4
Selon NFPA 704 / calculé à partir des codes H

Vérifiez si Isopropyl Myristate est compatible avec un autre réactif

📦 Matrice de compatibilité de stockage
Acides Bases Oxydants Inflammable Toxique Gazy
Acides ✓ ✗ ✗ ✗ ⚠ ✗
Bases ✗ ✓ ⚠ ⚠ ⚠ ⚠
Oxydants ✗ ⚠ ✓ ✗ ⚠ ✗
Inflammable ✗ ⚠ ✗ ✓ ⚠ ✗
Toxique ⚠ ⚠ ⚠ ⚠ ✓ ⚠
Gazy ✗ ⚠ ✗ ✗ ⚠ ✓
✓ Stockage commun possible · ⚠ Prudence · ✗ NE PAS stocker ensemble · OSHA Chemical Segregation ↗

Données de compatibilité issues de : Bretherick's Handbook (7th ed.) ↗, GESTIS ↗, ECHA REACH ↗, NFPA 704 ↗

🧮 Calculateurs de laboratoire (8)
Dilution (C₁V₁=C₂V₂)
Molarité (M=n/V)
Tampon pH (Henderson-Hasselbalch)
Beer-Lambert (A=εcl)
Masse → Moles
Concentration % → M
ppm → mg/L
Température C↔F↔K

Formules vérifiées : IUPAC Gold Book ↗, DOI ↗

📊 Bases de spectres spectroscopiques
📋 Générateur de protocole de laboratoire

Protocole généré à partir de : GHS SDS, Aldrich Lab Guide ↗

🏷️ Générateur d'étiquette (QR)
Isopropyl Myristate• Isopropyl tetradecanoate / Isomyst• IUPAC: propan-2-yl tetradecanoate• CAS: 110-27-0• EC: 203-751-4• Formule: C17H34O2• Masse: 270.5 g/molATTENTIONMENTIONS DE DANGER GHS :(auto-classification des fournisseurs — non contraignante)P264: Se laver … soigneusement après manipulation.Réservé à un usage en laboratoire !Nonsensia Ltd124-128 City Road, EC1V 2NX London[email protected]molgod.orgN° de lot: Masse nette:
🧪 Assistant de préparation de solution (Smart Prep)

Saisissez ce que vous souhaitez préparer — je générerai un SOP

Exemples ci-dessous — cliquez pour insérer :
Recettes prédéfinies :
📚 Aperçu de la littérature scientifique — CAS 110-27-0
⭐ Principales découvertes (littérature scientifique) 1 publications
🏆 CAS 110-27-0 — multi-criteria ranking (W12): 30% citations · 20% actualité · 20% thème · 15% historique · 15% open access.
  1. #1
    Abraham MH, Acree WE Jr (2005) · International journal of pharmaceutics
    Pourquoi c'est important : Sélectionné par un score multicritère (citations + actualité + thème + historique + OA).
    SCORE 0 Mécanisme DOI ↗ PubMed ↗

Pourquoi cette page peut être vérifiée

Identité

CAS, EC et formule moléculaire, résolus dans les systèmes d’identifiants qu’utilise un acheteur. Le nombre de systèmes résolus est indiqué, pour que vous voyiez à quel point cette substance est bien caractérisée au lieu de le supposer.

Données

Chaque valeur physico-chimique porte la source dont elle provient et la date à laquelle cette source a été consultée. Ouvrez-en n’importe laquelle.

Classification

Lue au regard de l’entrée harmonisée lorsqu’elle existe, avec mention du numéro index. L’auto-classification est présentée séparément et signalée.

Réglementation

Statut au regard des inventaires, des restrictions, de l’autorisation et de la liste des substances candidates, chacun indiqué séparément. Lorsqu’un statut n’est pas établi, cette page le dit — elle n’affirme jamais qu’aucune restriction ne s’applique.

Documentation

Quels documents existent, à quel niveau de vérification, dans quelles langues et quand chacun a été émis.

Fournisseur

Qui vend ceci, et ce qu’il a publié sur lui-même.

Rien sur cette page ne constitue une certification. C’est un enregistrement que vous pouvez auditer.

Two guarantees, both with their limits stated

The Gap Report Guarantee

If the available evidence cannot support a defensible document for your CAS number and product specification, we will not invent the missing values. You receive a documented gap report and choose: a refund, store credit, or the report on its own.

A visible gap is worth more than a plausible number, because the plausible number is the one that fails when somebody checks it.

The Re-issue Promise

If a signed card is rejected by an authority or by a customer’s compliance officer on one of the points we checked and reported as passed, we re-issue it corrected at no charge and credit the original fee.

This covers the checks we performed and named. It does not cover registration status, tonnage, or your role in the supply chain — those are not ours to hold, and a guarantee that pretended otherwise would be worth nothing.

Изопропилмиристат — CAS 110-27-0. Prepared from the supplier’s public catalogue; not verified against their internal data.

📄 Certificats d'analyse (CoA) CAS 110-27-0 aucun

Aucun certificat pour ce produit dans la base de données.

📚 Références scientifiques (Chicago Author-Date) — cliquez pour développer

Normes de gestion des lots et de certification en laboratoire — 13 sources indépendantes (ICH Q1/Q3/Q6/Q7/Q10 + ISO 17025 + WHO TRS + 21 CFR 211 + EMA + USP + Ph.Eur. + PIC/S + IPEC-PQG).

  1. International Council for Harmonisation (ICH). 2000. "Q7 Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients." ICH Expert Working Group. [lien ↗] — GMP for APIs — adopted by EMA, FDA, MHLW
  2. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. [lien ↗] — Lab accreditation standard underpinning every CoA
  3. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. [lien ↗] — WHO TRS No. 957 — global reference for GMP
  4. International Council for Harmonisation (ICH). 2003. "ICH Q1A(R2): Stability Testing of New Drug Substances and Products." International Council for Harmonisation. [lien ↗] — Source for batch shelf-life and retest dating
  5. International Council for Harmonisation (ICH). 2006. "ICH Q3A(R2): Impurities in New Drug Substances." ICH. [lien ↗]
  6. International Council for Harmonisation (ICH). 1999. "ICH Q6A: Specifications for New Drug Substances and Products." ICH. [lien ↗] — CoA acceptance-criteria specification standard
  7. International Council for Harmonisation (ICH). 2008. "ICH Q10: Pharmaceutical Quality System." ICH. [lien ↗]
  8. U.S. Food and Drug Administration. 2024. "21 CFR Part 211: Current Good Manufacturing Practice for Finished Pharmaceuticals." US Code of Federal Regulations. [lien ↗] — US legal mandate (Subpart J — Records and Reports)
  9. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. [lien ↗]
  10. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. [lien ↗]
  11. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. [lien ↗]
  12. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. [lien ↗] — Cross-recognized GMP for 54 inspectorates worldwide
  13. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. [lien ↗] — Excipient-grade CoA standard for non-API ingredients
Données de PubChemSource : PubChem (NIH)
📤 Intégrez cette molécule sur votre site

Vous avez un blog, un forum ou un service scientifique ? Intégrez la molécule 3D interactive sur votre site — chacun de vos lecteurs la verra, avec en dessous un lien vers notre boutique où il peut acheter le réactif.

🔗 Code HTML iframe (le plus simple — fonctionne partout)

Copiez et collez dans l'éditeur HTML de votre site :

Ajustez width et height à votre mise en page.

⚙ WordPress Shortcode (pour d'autres boutiques avec MOL-GOD)

🌐 Lien direct (pour e-mails, chats, LinkedIn, Twitter)

LinkedIn Twitter/X Facebook
QR code CAS 110-27-0

📱 QR code (pour l'impression sur flyers / étiquettes / catalogues)

Placez-le dans un catalogue de produits, sur une étiquette de flacon ou un flyer. Le client le scanne — il voit la molécule 3D sur son téléphone, avec un lien vers votre boutique.

⬇ Télécharger le PNG

🖼 Open Graph image (pour les balises meta des réseaux sociaux)

En partageant le lien, Facebook/LinkedIn/Discord récupérera automatiquement l'aperçu de l'image :

Preview
📋 Licence : L'intégration conserve un lien retour vers MolGod (requis — la boutique est la source des données). Les données chimiques proviennent de PubChem (CC0 — domaine public). L'intégration est GRATUITE pour un usage éducatif, commercial et de loisir.
📚 RÉFÉRENCES (Bibliographie agrégée, Chicago Author-Date) 77 éléments

Toutes les sources scientifiques citées dans les accordéons ci-dessus pour le CAS 110-27-0. Format : Chicago Manual of Style, 17e éd., système Auteur-Date.

🗄️ Bases de données scientifiques

  1. NIST. n.d. NIST Chemistry WebBook: CAS 110-27-0. Gaithersburg, MD: National Institute of Standards and Technology. https://webbook.nist.gov/cgi/cbook.cgi?ID=110-27-0.
  2. AIST. n.d. Spectral Database for Organic Compounds (SDBS): CAS 110-27-0. Tsukuba, Japan: National Institute of Advanced Industrial Science and Technology. https://sdbs.db.aist.go.jp/.
  3. Linstrom, Peter J., and William G. Mallard, eds. n.d. NIST Chemistry WebBook: NIST Standard Reference Database Number 69. Gaithersburg, MD: National Institute of Standards and Technology. https://doi.org/10.18434/T4D303.
  4. PubChem. n.d. PubChem Compound Summary: CAS 110-27-0. Bethesda, MD: National Center for Biotechnology Information (NCBI), National Library of Medicine. https://pubchem.ncbi.nlm.nih.gov/#query=110-27-0.

📐 Normes / Lignes directrices

  1. ICH. 2003. "Stability Testing of New Drug Substances and Products: Q1A(R2)." Geneva: International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf.
  2. National Fire Protection Association (NFPA). 2024. "NFPA 30: Flammable and Combustible Liquids Code." NFPA, Quincy, MA. https://www.nfpa.org/codes-and-standards/all-codes-and-standards/list-of-codes-and-standards/detail?code=30.
  3. Occupational Safety and Health Administration (OSHA). 2023. "29 CFR 1910.106 — Flammable Liquids." U.S. Department of Labor, Federal Register. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.106.
  4. European Chemicals Agency (ECHA). 2024. "Annex VI to Regulation (EC) No 1272/2008 (CLP) — Harmonised Classification and Labelling." ECHA, Helsinki / Official Journal of the European Union. https://echa.europa.eu/regulations/clp/clp-classification.
  5. European Committee for Standardization (CEN). 2016. "EN 374-1:2016 — Protective gloves against dangerous chemicals and micro-organisms — Part 1: Terminology and performance requirements for chemical risks." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=205:110:::::FSP_PROJECT,FSP_ORG_ID:38536,6080&cs=1B0DAA8B85DF42E4A2C70E5D71F0BFA32.
  6. European Committee for Standardization (CEN). 2001. "EN 166:2001 — Personal eye-protection — Specifications." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:6541&cs=1F1A4E0A78C4DB6A28DBE2E8C29D89DCF.
  7. European Committee for Standardization (CEN). 2009. "EN 14605:2005+A1:2009 — Protective clothing against liquid chemicals — Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections." CEN, Brussels. https://standards.cencenelec.eu/dyn/www/f?p=CEN:110:0::::FSP_PROJECT:21581&cs=1A04A2D3C7CC58E9E6CB58D55F7EBFB7E.
  8. National Institute for Occupational Safety and Health (NIOSH). 2017. "Recommendations for Chemical Protective Clothing: A Companion to the NIOSH Pocket Guide." U.S. Department of Health & Human Services / CDC. https://www.cdc.gov/niosh/ncpc/default.html.
  9. Occupational Safety and Health Administration (OSHA). 2011. "Personal Protective Equipment — General requirements." U.S. Department of Labor — 29 CFR 1910.132. https://www.osha.gov/laws-regs/regulations/standardnumber/1910/1910.132.

📖 Livres

  1. Hansen, Charles M. 2007. Hansen Solubility Parameters: A User's Handbook, 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/Hansen-Solubility-Parameters-A-Users-Handbook/Hansen/p/book/9780849372483.
  2. Barton, Allan F. M. 1991. CRC Handbook of Solubility Parameters and Other Cohesion Parameters: 2nd ed.. Boca Raton, FL: CRC Press. https://www.routledge.com/CRC-Handbook-of-Solubility-Parameters-and-Other-Cohesion-Parameters/Barton/p/book/9780849301766.
  3. Connors, Kenneth A., Gordon L. Amidon, and Valentino J. Stella. 1986. Chemical Stability of Pharmaceuticals: A Handbook for Pharmacists, 2nd ed.. New York: Wiley. https://openlibrary.org/isbn/9780471879558.
  4. Rumble, John R., ed. 2019. CRC Handbook of Chemistry and Physics: 100th Edition. Boca Raton, FL: CRC Press. https://hbcp.chemnetbase.com/.
  5. Urben, Peter G. 2017. Bretherick's Handbook of Reactive Chemical Hazards, 8th Edition. Academic Press / Elsevier, Oxford. https://www.sciencedirect.com/book/9780081010594.

📄 Articles scientifiques (évalués par les pairs)

  1. Stefanis, Emmanuel, and Costas Panayiotou. 2008. "Prediction of Hansen Solubility Parameters with a New Group-Contribution Method." International Journal of Thermophysics 29: 568-585. https://doi.org/10.1007/s10765-008-0415-z.
  2. Stoll, Vincent S., and John S. Blanchard. 1990. "Buffers: Principles and Practice: In Methods in Enzymology, vol. 182." San Diego: Academic Press. https://doi.org/10.1016/0076-6879(90)82008-P.

🌐 Sites web

  1. ECHA. 2023. "Guidance on the Application of the CLP Criteria." European Chemicals Agency. https://echa.europa.eu/guidance-documents/guidance-on-clp.
  2. European Parliament. 2006. "Regulation (EC) No 1907/2006 (REACH)." Official Journal of the European Union L 396: 1–849.
  3. ECHA. 2023. "Candidate List of Substances of Very High Concern for Authorisation." European Chemicals Agency. https://echa.europa.eu/candidate-list-table.
  4. European Parliament. 2008. "Regulation (EC) No 1272/2008 on Classification, Labelling and Packaging of Substances and Mixtures (CLP)." Official Journal of the European Union L 353: 1–1355.
  5. ECHA. 2017. "Guidance on the Compilation of Safety Data Sheets." Version 3.1. European Chemicals Agency. ECHA-17-G-01-EN. https://echa.europa.eu/documents/10162/23047722/sds_en.pdf.
  6. ECHA. 2022. "Restrictions Under REACH — Annex XVII." European Chemicals Agency. https://echa.europa.eu/substances-restricted-under-reach.
  7. United Nations. 2021. Globally Harmonized System of Classification and Labelling of Chemicals (GHS). 9th revised ed. ST/SG/AC.10/30/Rev.9. New York and Geneva: United Nations. https://unece.org/ghs-rev9-2021.
  8. ECHA. 2020. "Understanding REACH." European Chemicals Agency. https://echa.europa.eu/regulations/reach/understanding-reach.
  9. United States Pharmacopeial Convention. 2024. "USP <621> Chromatography." In United States Pharmacopeia and National Formulary, USP 47-NF 42. Rockville, MD: USP. https://www.uspnf.com/.
  10. European Pharmacopoeia Commission. 2024. "2.2.46 Chromatographic Separation Techniques." In European Pharmacopoeia, 11th ed. Strasbourg: Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  11. International Council for Harmonisation (ICH). 2022. "ICH Q2(R2): Validation of Analytical Procedures." International Council for Harmonisation. https://database.ich.org/sites/default/files/ICH_Q2%28R2%29_Guideline_2022_1130.pdf.
  12. International Council for Harmonisation (ICH). 1996. "ICH Q3A: Impurities in New Drug Substances." International Council for Harmonisation. https://database.ich.org/sites/default/files/Q3A%28R2%29%20Guideline.pdf.
  13. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General Requirements for the Competence of Testing and Calibration Laboratories." Geneva: ISO. https://www.iso.org/standard/66912.html.
  14. Kolthoff, Izaak Maurits, and Philip J. Elving, eds. 1978. Treatise on Analytical Chemistry, Part I: Theory and Practice. 2nd ed. New York: Wiley-Interscience.
  15. Skoog, Douglas A., F. James Holler, and Stanley R. Crouch. 2018. Principles of Instrumental Analysis. 7th ed. Boston: Cengage Learning.
  16. Christian, Gary D., Purnendu K. Dasgupta, and Kevin A. Schug. 2014. Analytical Chemistry. 7th ed. Hoboken, NJ: Wiley.
  17. EURACHEM/CITAC. 2012. "Quantifying Uncertainty in Analytical Measurement." 3rd ed. EURACHEM/CITAC Guide CG 4. https://www.eurachem.org/images/stories/Guides/pdf/QUAM2012_P1.pdf.
  18. International Organization for Standardization. 1994. "ISO 5725-2:1994 Accuracy (Trueness and Precision) of Measurement Methods and Results — Part 2: Basic Method for the Determination of Repeatability and Reproducibility of a Standard Measurement Method." Geneva: ISO. https://www.iso.org/standard/11834.html.
  19. Heckert, N. A., and J. J. Filliben. 2003. "NIST/SEMATECH e-Handbook of Statistical Methods." NIST Handbook 151. Gaithersburg, MD: National Institute of Standards and Technology. https://www.itl.nist.gov/div898/handbook/.
  20. Grubbs, Frank E. 1950. "Sample Criteria for Testing Outlying Observations." Annals of Mathematical Statistics 21 (1): 27–58.
  21. Dixon, Wilfrid J. 1950. "Analysis of Extreme Values." Annals of Mathematical Statistics 21 (4): 488–506.
  22. Snedecor, George W., and William G. Cochran. 1989. Statistical Methods. 8th ed. Ames, IA: Iowa State University Press.
  23. Student [William Sealy Gosset]. 1908. "The Probable Error of a Mean." Biometrika 6 (1): 1–25.
  24. International Organization for Standardization. 2005. "ISO 3534-1:2006 Statistics — Vocabulary and Symbols — Part 1: General Statistical Terms and Terms Used in Probability." Geneva: ISO. https://www.iso.org/standard/40145.html.
  25. Thompson, Michael, Stephen L. R. Ellison, and Roger Wood. 2002. "Harmonized Guidelines for Single-Laboratory Validation of Methods of Analysis." Pure and Applied Chemistry 74 (5): 835–855.
  26. United Nations Economic Commission for Europe. 2024. European Agreement Concerning the International Carriage of Dangerous Goods by Road (ADR), Applicable as from 1 January 2025 (ECE/TRANS/352). Geneva: UNECE. https://unece.org/transport/dangerous-goods/adr-2025-edition.
  27. International Air Transport Association. 2026. Dangerous Goods Regulations (DGR). 67th ed. Montreal: IATA. https://www.iata.org/en/programs/cargo/dgr/.
  28. International Maritime Organization. 2024. International Maritime Dangerous Goods (IMDG) Code, 2024 Edition (Amendment 42-24). London: IMO. https://www.imo.org/en/OurWork/Safety/Pages/DangerousGoods-default.aspx.
  29. United Nations. 2025. Recommendations on the Transport of Dangerous Goods: Model Regulations (Orange Book). 24th revised ed. ST/SG/AC.10/1/Rev.24. New York and Geneva: United Nations. https://unece.org/transport/dangerous-goods/un-model-regulations.
  30. International Civil Aviation Organization. 2025. Technical Instructions for the Safe Transport of Dangerous Goods by Air (Doc 9284). 2025–2026 ed. Montreal: ICAO. https://www.icao.int/safety/DangerousGoods/Pages/technical-instructions.aspx.
  31. European Commission. 2014. "Commission Decision 2014/955/EU on the list of waste pursuant to Directive 2008/98/EC." Official Journal of the European Union. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32014D0955.
  32. Ministerstwo Klimatu i Środowiska Rzeczypospolitej Polskiej. 2020. "Rozporządzenie Ministra Klimatu z dnia 2 stycznia 2020 r. w sprawie katalogu odpadów." Dziennik Ustaw RP 2020 poz. 10. https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20200000010. Règles nationales — Pologne
  33. Główny Inspektorat Ochrony Środowiska (GIOŚ). 2024. "Baza Danych O Odpadach (BDO) — System rejestracji firm utylizacyjnych." Ministerstwo Klimatu i Środowiska. https://bdo.mos.gov.pl/. Règles nationales — Pologne
  34. Polska — Sejm RP. 2012. "Ustawa z dnia 14 grudnia 2012 r. o odpadach." Dz.U. 2013 poz. 21 (z późn. zm.). https://isap.sejm.gov.pl/isap.nsf/DocDetails.xsp?id=WDU20130000021. Règles nationales — Pologne
  35. Furr, A. Keith, ed.. 2000. "CRC Handbook of Laboratory Safety." CRC Press.
  36. Pohanish, Richard P.. 2017. "Sittig's Handbook of Toxic and Hazardous Chemicals and Carcinogens." Elsevier.
  37. Lewis, Richard J.. 2012. "Sax's Dangerous Properties of Industrial Materials." Wiley.
  38. NIOSH. 2024. "Pocket Guide to Chemical Hazards." U.S. Department of Health and Human Services. https://www.cdc.gov/niosh/npg/.
  39. OSHA. 2024. "Occupational Chemical Database — Hazardous Waste Operations (HAZWOPER)." Occupational Safety and Health Administration. https://www.osha.gov/chemicaldata.
  40. European Parliament and Council. 2008. "Directive 2008/98/EC on waste (Waste Framework Directive)." Official Journal of the European Union L 312/3. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008L0098.
  41. European Parliament and Council. 2009. "Regulation (EC) No 1272/2008 (CLP) on classification, labelling and packaging of substances and mixtures." Official Journal of the European Union L 353. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32008R1272.
  42. United Nations Economic Commission for Europe (UNECE). 2023. "European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2025)." UNECE. https://unece.org/transport/standards/transport/dangerous-goods/adr-2025.
  43. IPCS INCHEM. 2024. "International Programme on Chemical Safety — Waste Management Guidelines." WHO/UNEP/ILO. https://www.inchem.org/.
  44. European Parliament and Council. 2006. "Regulation (EC) No 1013/2006 on Shipments of Waste." Official Journal of the European Union L 190: 1–98. https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:32006R1013.
  45. International Council for Harmonisation (ICH). 2000. "Q7 Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients." ICH Expert Working Group. https://database.ich.org/sites/default/files/Q7%20Guideline.pdf.
  46. International Organization for Standardization. 2017. "ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories." ISO. https://www.iso.org/standard/66912.html.
  47. World Health Organization. 2010. "WHO Good Manufacturing Practices for Pharmaceutical Products: Main Principles (WHO Technical Report Series No. 957, Annex 3)." WHO Press. https://www.who.int/publications/m/item/trs957-annex3.
  48. International Council for Harmonisation (ICH). 2003. "ICH Q1A(R2): Stability Testing of New Drug Substances and Products." International Council for Harmonisation. https://database.ich.org/sites/default/files/Q1A%28R2%29%20Guideline.pdf.
  49. International Council for Harmonisation (ICH). 2006. "ICH Q3A(R2): Impurities in New Drug Substances." ICH. https://database.ich.org/sites/default/files/Q3A%28R2%29%20Guideline.pdf.
  50. International Council for Harmonisation (ICH). 1999. "ICH Q6A: Specifications for New Drug Substances and Products." ICH. https://database.ich.org/sites/default/files/Q6A%20Guideline.pdf.
  51. International Council for Harmonisation (ICH). 2008. "ICH Q10: Pharmaceutical Quality System." ICH. https://database.ich.org/sites/default/files/Q10%20Guideline.pdf.
  52. U.S. Food and Drug Administration. 2024. "21 CFR Part 211: Current Good Manufacturing Practice for Finished Pharmaceuticals." US Code of Federal Regulations. https://www.ecfr.gov/current/title-21/chapter-I/subchapter-C/part-211.
  53. European Medicines Agency. 2014. "Guideline on Process Validation for Finished Products — Information and Data to Be Provided EMA/CHMP/CVMP/QWP/BWP/70278/2012." European Medicines Agency. https://www.ema.europa.eu/en/documents/scientific-guideline/guideline-process-validation-finished-products-information-data-be-provided-regulatory-submissions-revision-1_en.pdf.
  54. United States Pharmacopeial Convention. 2024. "United States Pharmacopeia and National Formulary, USP 47-NF 42." USP. https://www.uspnf.com/.
  55. European Pharmacopoeia Commission. 2024. "European Pharmacopoeia 11th Edition." Council of Europe — EDQM. https://www.edqm.eu/en/european-pharmacopoeia-ph-eur-11th-edition.
  56. Pharmaceutical Inspection Co-operation Scheme (PIC/S). 2021. "Guide to Good Manufacturing Practice for Medicinal Products PE 009-15." PIC/S Secretariat, Geneva. https://picscheme.org/en/publications.
  57. International Pharmaceutical Excipients Council (IPEC) and Pharmaceutical Quality Group (PQG). 2017. "Joint IPEC-PQG Good Manufacturing Practices Guide for Pharmaceutical Excipients." IPEC-Americas. https://ipecamericas.org/sites/default/files/IPECPQGGMPGuide2017.pdf.
📥 Télécharger BibTeX📥 Télécharger RISImport dans Zotero/Mendeley/EndNote/Papers.
📜 Licence et provenance
COMPUTED — PubChem3D · 3D conformer computed by PubChem using OMEGA; not an experimental structure.
Modèle
Isopropyl Myristate · 110-27-0
InChIKey
AXISYYRBXTVTFY-UHFFFAOYSA-N
Licence
CC BY-SA 4.0 International
Attribution
MolGod Scientific — Isopropyl Myristate (CAS 110-27-0)
Fiche de licence et de provenance
Isopropyl Myristate (CAS 110-27-0) →
Fiche moléculaire MolGod
Isopropyl Myristate →
Données source
PubChem CID 8042 ↗
Informations sur le modèle
STL généré par MolGod · MolGod STL Exporter build 48804cd20b0d · généré le 2026-10-14
SHA-256 (STL)
7c6c4ae4f44da80581d0fd5bf21b76312eb07686aaba7b2d34e285ec2576945e
MD5 (STL)
dc236441efdf0e572e213c9712b1b942
MolGod Identification Number
MG_120-056-815-62
Transformation
Maillage boules-et-bâtonnets MolGod Scientific
Modifications
Converti en maillage moléculaire triangulé ; coordonnées atomiques et connectivité inchangées.
Wikimedia Commons
pas encore publié
Modèle de molécule gratuit à imprimer
Téléchargez le modèle, imprimez-le et utilisez-le dans l’enseignement. Lorsque vous publiez une photo, un support ou une adaptation, la licence CC BY-SA 4.0 International exige de citer « MolGod Scientific » comme auteur du modèle, d’indiquer un lien vers l’original et vers le texte de la licence, de signaler les modifications apportées et de partager les adaptations sous la même licence. Un texte d’attribution prêt à l’emploi figure dans cette section. Sans inscription, sans frais et sans obligation de laisser un avis.

Cette licence s'applique au maillage STL créé par MolGod, et non automatiquement aux matériaux sources de tiers.